60 photos with the best ideas for planning baths with an attic

There are probably few sorrows in the world that cannot be cured with a good old bath. Especially if this bathhouse is private property and is logically integrated into a single living space. In this case, the highest comfort is guaranteed. But only if you took care of it ahead of time. And to do this, you need to take into account all the nuances at the stage of creating the project and fit the bathhouse into the project in such a way that after, already enjoying this sweet hundred-degree torture, you can praise yourself in your thoughts for a successfully implemented idea. Of course, not every person can boast of engineering vision and consider all the advantages of building a bathhouse with an attic at the planning stage. In this case, our material will definitely help you.

Advantages

a good option for expanding useful space when there is a shortage of space;
the ability to place a recreation area on an additional site, which harmoniously fits into the use of the bathhouse;
optimization of the site by equipping auxiliary premises - for example, a storage room;
use as a guest room or a mini-bedroom option during festive events;
cost savings compared to a two-story structure.

In short, bathhouses with an attic allow you to solve several problems at once with obvious benefit to yourself. And even if chasing two birds with one stone, there is always a risk of missing both, people sensibly assess all the possibilities and successfully implement such an idea on their plots. As proof - a huge number of projects for bathhouses with an attic for a wide variety of sizes. Let's start with the most popular ones.

Second phase. Creating a foundation

Since a structure made of wood is lightweight, there is no need for a complex foundation. One of the options will do: ribbon or columnar.

The strip foundation has the shape of a circle closed around the perimeter of the structure. In the trench, formwork is created from boards. A layer of sand 15 cm thick is laid on the bottom. The depth of the trench is half a meter, and the width must be wider than the planned foundation to take into account the formwork. This option is more reliable and allows you to make a basement under the building.
The columnar version is made by making piles that are buried in the ground to a depth lower than the ground freezes. The piles are installed in the corners of the building and every 2 m around the perimeter. This option is cheaper.

The initial stage of foundation construction

1 5

Projects 6x6 m

excellent saving of usable space and quite a large space in the equipped attic;
on the ground floor you can place a separate steam room and sink;
depending on the number of people who regularly use the bathhouse, you can make the rooms larger or smaller;
possibility of arranging a small terrace.

Today, this format should be recognized as one of the most common. Popular designs for 6x6 bathhouses with an attic include not only the actual functional rooms, but also relaxation rooms and terraces, which in different cases are no less important than the design of a steam room or shower room. Of course, in this format it is difficult to count on the terrace being spacious enough, but still the minimum required space is a very realistic goal. Especially if you use the sauna during the summer season.

What are walls made of?

When designing walls, it is important to make the right choice of material. They are made from rounded or chopped logs, bricks, and blocks. The most popular option for this design is timber. It can be glued, profiled, or simple. It is easy to work with and environmentally friendly.

Construction algorithm:

Lay a layer of waterproofing (roofing felt or waterproofing) on the foundation;
Lay out the first row of beams, fastening them together with a dovetail or using the tongue-and-groove method;
Check if the diagonals on each rectangle are equal;
When choosing a floor structure in a steam room, beams (steps of at least 500 mm) and subfloors are created from wood;
When constructing a tiled or heated floor, it is necessary to pour sand and gravel and lay temporary flooring;
The timber is laid in rows, their connection is ensured by wooden dowels. There is no need to use metal options for a number of reasons. When rust appears on the nails, obstacles will be created for the shrinkage of the log house, and gaps will appear between the rows. It is worth considering the possible transfer of the building to another site, which in this case is difficult to implement;
Check the horizontality of the top row on which the rafter system is supported.

6x6 with attic and toilet

For complete convenience, not only a rest room is often required, but also a toilet. It's good if it's located nearby. But if not, then the design of a 6x6 bathhouse with an attic and a toilet will allow you to eliminate unpleasant excesses and significantly increase the comfort for everyone who uses the bathhouse. We offer you several designs for planning a bathhouse with an attic of this type, which have been successfully implemented.

Materials for building a bathhouse

The traditional and time-tested material for building a bathhouse is wood. Either solid logs or wooden beams are used. If the log has a round cross-section, then the timber is square (rectangular). The timber can be unprofiled, profiled or glued.

A bathhouse made of hewn logs must undergo shrinkage before use, but a bathhouse made of timber can be used immediately.

Timber is more expensive than logs, but has a number of advantages: it is lighter, construction is easier from it, and thermal insulation is better.

Baths are also built from brick and foam concrete, while the inside of the room is lined with wood.

4x6

construction with a gable roof;
compromise solution;
An economical option in every sense.

When your options are limited, it makes sense to turn to such a solution. Despite the fact that the design of a 4x6 bathhouse with an attic is a compromise and minimalistic solution, it is still possible to bring many interesting ideas to life even in such a cramped format. By the way, in a 4x6 bathhouse you can easily arrange a sink with a steam room separately - there are many examples of perfectly implemented projects.

You can arrange a small rest room with a sleeping place in the attic. Or maybe even two, it all depends on your resourcefulness in developing the project.

Filling the rest room

After a hot steam room, you need to calm down and normalize your body temperature. The ideal place for this is the rest room. Each owner decides for himself what will be located here, selecting the content in accordance with his tastes and goals. However, it is worth taking the materials and equipment used with a high degree of responsibility.

Furniture must be resistant to high temperature and moisture.
When installing lighting fixtures, high-quality insulation is required.
You should not install lamps that are too bright, as this will not allow you to relax.

It is also advisable to keep the room in the same style. This has no functional significance, but will speak volumes about your sense of style.

Relaxation room in the bathhouseSource mirturbaz.ru

5x5

most often it is impossible to place even a small terrace - instead there is a rest room;
the gable roof increases the space above;
Great for use in a guest house format.

You can modestly but tastefully design a 5x5 bathhouse with an attic. The roof can also be implemented in a broken format, but the gable version allows you to use literally every meter of usable space as efficiently as possible.

Construction requirements

Before you start planning and developing drawings, it is important to read the regulatory documentation of the current legislation, which regulates the construction of baths

This list includes:

SanPiN 1.2. 3150-13 “Sanitary and epidemiological requirements for the placement, design, equipment, maintenance and operating hours of baths and saunas.”
SP 22.13330.2011.
SP 64.13330.2011 - updated version of SNiP II-25-80.
TKP 45-5.05-146-2009, TKP EN 1995-1-1-2009. Requirements for the design of wooden baths.

Find out more about construction standards on a summer cottage:

In addition, it is worth considering the following:

It is better to build a bathhouse on a hill.
A free-standing structure should be clearly visible from the windows of a residential building.
When choosing a location on a site, the wind rose is always taken into account so that the smoke does not disturb the neighbors. This applies to buildings that are heated by wood stoves.

We recommend that you read:

How to choose stones for a sauna stove
DIY chimney sandwich

6x8

an excellent option for a fairly spacious area;
you can place not only a separate sink and steam room, but also a relaxation room and a terrace;
placement of several functional areas at once;
For the foundation, you should choose a strip type of foundation.

Surely every owner dreams of such a bathhouse. In total, such a building gives almost 50 square meters, which can be used to realize all your ideas. A 6x8 bathhouse project with an attic may include placing not a guest room upstairs, but also a billiard room, a games room, and even a storage room. However, you should ensure reliable waterproofing of the attic and take the ventilation system equipment seriously. Still, there can be no talk of any comfort in the same billiard room if the air is characterized by high humidity, and the floor smells of rot and other not very pleasant aromas, indicating deformation of the base.

You will also need to think about air conditioning in the summer season, since the steam room will in any case transfer some of its heat to the attic. If all these issues can be resolved, then you can safely envy you, since a successfully implemented project for a 6x8 bathhouse with an attic is a unique opportunity for a pleasant holiday at any time of the year.

Zoning

Depending on the size of the bath, the entire space can be divided into 3 or more zones. It is recommended to divide even a bathhouse of a minimum size of 2x3 with internal partitions, rather than leaving one room. Firstly, a small steam room warms up faster, and secondly, the washing room should be separate so that the steam room does not smell damp. And finally, the dressing room must be protected from steam, otherwise it will not be comfortable to be in it.

First, you need to allocate a dressing room, the rest of the space is for a washing room and steam room. Usually in a small bathhouse a small area is allocated for him at the entrance, on one side of which there is a door to the street, on the other to the washing room. The smallest dressing room has enough space for a small bench. A third of the entire area is enough for this. If the bathhouse is larger than 2x3, for example, 6x6, then a large area can be allocated for the dressing room, combining it with a relaxation room. Then you can allocate half of the entire area for this zone. If the space allows, then in front of the vestibule you can build a terrace or allocate an area for a veranda. In this case, an indoor recreation room is not necessary; it can be equipped on the terrace and used in the summer. This option is ideal if the bathhouse is attached to the house and you can relax in the winter directly in the house.

Next, you should separate the steam room from the washing room. Combined washing and steam rooms are not uncommon, but ideally there should be a partition between them. If the bathhouse is used by one person or a small family, then it is enough to allocate an area of 600x600 mm for the washing area. It can only accommodate a shower. The rest of the area will be equipped as a steam room. If possible and necessary, you can also place a bathroom, swimming pool or plunge pool in the washing area. An example of zoning a 20m2 (4x5) bathhouse: relaxation room 8.5 m2, washroom and bathroom 2.2 m2, steam room 4.8 m2.

The most important area of the sauna is the steam room. When planning the size of the steam room, you need to take into account that one person requires 1 m2 plus space for the stove. As a rule, the minimum size of a steam room is 2 m2. If the stove is not brick, but metal, then it should be separated by a brick partition to avoid burns. Also, the metal stove should be located at a distance of 1 meter from the wall. This does not apply to a brick oven.

The size of the steam room is determined by several factors:

ventilation system device;
materials from which the bathhouse is built;
the size of the family that will use the bathhouse;
features of the stove installed in the steam room (size, power, type);
the number and location of shelves and other equipment in the steam room, ergonomic indicators of the steam room.

8x8

large scope for integration of auxiliary premises;
the need for zoning of located objects;
possibility of arranging a spacious terrace;
separate placement of steam room and sink;
3-4 sleeping places in the attic;
If desired, you can also design a compact pool.

This is where you can really have a blast! The design of an 8 by 8 bathhouse with an attic can include literally everything your heart desires: from a comfortable dressing room and a spacious entrance to a spacious billiard room upstairs next to the bedroom. The square base of the building allows you to use literally every centimeter of free space for business benefit. You can even arrange access to the balcony. Isn't it great to get out and get some fresh air while enjoying a wonderful holiday?

Of course, in order to ensure comfort not only on paper, but also in practice, it makes sense to take care of reliable waterproofing of the floor base. In this case, you will significantly extend the service life of the materials used and achieve almost ideal safety in using the building.

The layout of bathhouses with an attic in the case of using the 8x8 format becomes more complicated due to greater variation in the placement of entrances and the integration of additional modules like the same balcony, but the end result is amazing. And this is the best option for planning a plot of 10 acres with a house, a bathhouse and a garage. In fact, this is a guest house with a bathhouse function. All that remains is to visit it more often and enjoy a perfect vacation.

House layout 6 by 6

When designing a compact house, its purpose is taken into account. This could be a country house for summer holidays or a house for year-round residence of a small family. In the first case, the layout allocates more space for the personal premises of the owners, and the daytime area is planned with a minimum area.

If a house with an area of about 36 sq. meters will be used as a permanent home; when designing the daytime area, more attention is paid. In addition, in a year-round house it is necessary to provide space for technical premises.

Cottage

Single-story 6 by 6 buildings are ideal for older people, as well as for young families who do not yet have the funds to build a large private house. The advantages of such houses are not only that they are inexpensive to build, but also that they are very economical to operate. They do not require large heating and repair costs, and besides, such a house is not at all difficult to care for.

With this solution, the inside of the cottage seems more spacious and bright. But the bedroom is still often planned to be isolated. The bathroom must be isolated. It is advisable to have a closed buffer zone in the form of a hallway or a small vestibule at the front door.

Two-storey house

Two-story country houses of any size can be attic or with a full second floor. The regular and attic upper level have several important differences:

a regular floor has more usable space;
it is cheaper to build an attic;
the attic roof must be equipped by highly qualified specialists;
the attic floor adds a minimum of weight to the overall structure of the building.

It is worth noting that it is better to build small houses with attics. In this case, they turn out to be more proportional, which has a beneficial effect on both the appearance of the building and its structural characteristics.

In a two-story house, sleeping quarters are usually located on the second floor. If the layout of a 6 by 6 one-story house involves placing one bedroom next to the living room, then in a two-level cottage the bedrooms form a separate quiet area on the second floor, intended only for the owners.

It should be noted that in a two-story building, part of the internal area will be allocated for the interfloor staircase and landings. That is, the territory of the lower floor of a small house turns out to be much smaller.

Veranda. Needed or not?

The question of the veranda remains open in the case of the construction of small-format baths. Of course, in all respects, a bathhouse with a veranda and attic looks preferable than without it. Still, a small space for relaxing in the fresh air seems like a small thing only on paper, but in reality it is often what is not enough to achieve maximum pleasure from spending time with family and friends.

However, if the shortage of usable space is felt more than acutely, then it is better to implement the project of a bathhouse with an attic without this element. Still, do not forget that you are building a bathhouse first and foremost - and it is better to make every effort to ensure that after visiting it you have an extremely positive impression.

If there is a lack of usable space, you can replace the veranda with a more comfortable lounge or a small balcony in the attic. In this case, you will not lose any comfort, you will see. However, we will leave several projects with the layout of bathhouses with an attic, where there was room for a veranda, here.

It's all in the details

And finally, some practical recommendations.

Sauna stove and water tank

The bathhouse needs to be heated and the water heated.

In a 6x6 sauna, it is practical to use a stone stove. Metal heats up quickly and cools just as quickly. Therefore, its heat is not enough for all rooms.

A swimming pool in a bathhouse is a dream

If there is a second floor, the pipe coming out of the stove must be lined with bricks like a Dutch oven (for 3 wells).

In addition to the stove, you will need a boiler or water heating tank. Often, wanting to save on footage, they combine a hot water tank and a stove - very reasonable.

A stove combined with a tank.

Types of tanks:

combined. The stove heats up the water. True, because of this it gives a little less heat to the rooms;
pipe The stove is separate, the tank is separate. And the tank can be located in the room above the stove to be closer to the chimney;
remote They are equipped in the shower compartment and require the installation of a heat exchanger.

When choosing a tank, roughly calculate how many people will be steaming in the sauna at the same time. 10 liters are needed for 1 person. And for 6 – at least 60-75 liters.

Restroom

If it is on the second floor, there will be room in it for a billiard table, a bar counter, and a couple of cozy sofas.

Does the layout include a balcony or terrace? Bring a couple of chairs and a table there too. Please note that the internal area will be reduced in this case.

Accommodation on site

6x6 is a decent size for a building

But the bathhouse should not block the entrance to the house or immediately attract attention

It is better if it stands at some distance, hidden from prying eyes by a hedge or fence. Then, next to the steam room, you can put a large barrel or equip an artificial pond for contrasting procedures. This is if there was no room for a pool inside.

The 6x6 bathhouse layout options presented below will tell you which direction to go. Or donate the dressing room, combining it with the dressing room. This will allow the steam room or pool itself to be larger. Or make room for the kitchen as well. And then you get a small residential house with an additional highlight in the form of a steam room. And so, and so good.