The protective coating “EUROTEX-SAUNA”® is designed to protect wood under conditions of high temperatures and cyclic moisture. Provides long-term protection of wood from wood-destroying, wood-staining and mold fungi. Due to the presence of wax in the composition, it has exceptionally high water- and dirt-repellent properties; has low water absorption even with prolonged exposure to hot water. Forms a silky, colorless coating that does not interfere with the natural breathing of wood. Protects against pathogenic microorganisms. Contains wood antiseptics that are reliably blocked in the surface of the wood and do not release from the coating even when exposed to high temperatures, which makes the use of the composition in steam rooms absolutely safe for people.
APPLICATION
Application area
Indoors, including conditions of high temperatures and cyclic humidification (baths and saunas): steam rooms (except for shelves), locker rooms, rest rooms, washing rooms.
Working conditions
Work on applying the composition should be carried out at a temperature not lower than +5°C.
Surface preparation
Mix acrylic varnish EUROTEX Sauna thoroughly before use. Apply to dry wood that is free of dirt, dust and other coatings.
Tool
Apply by brush, roller or spray.
Number of layers
Apply 1 layer in the steam room (except for shelves), and 2-3 layers in the washing room.
Drying time
Apply subsequent layers no earlier than 20 minutes and no later than 40 minutes after applying the previous layer. If the interlayer drying time exceeds 40 minutes, then apply the composition intensively with a brush. Operational readiness - after 3 days of drying and subsequent heating.
Precautionary measures
The composition is odorless, non-toxic, non-flammable. In case of contact with skin or eyes, rinse with water. Dispose of as household waste. Keep away from children!
Cleaning the instrument
Clean the tool with water before the composition dries.
Eurotex Sauna (0.9 kg)
Purpose:
Protection of wood from biological damage (mold, rot, fungus, blue stain), strong moisture and destruction under conditions of high temperatures and periodic moisture.
Application area:
It is used in steam rooms (except for shelves), washrooms and other rooms of baths and saunas:
- on new or old (unpainted or cleaned of old coating) wooden bases in baths and saunas
- for any wood-based materials (plywood, chipboard, fiberboard, MDF, OSB, laminated veneer lumber, etc.)
Suitable for treating wooden floors in baths and saunas.
Properties:
- contains a highly effective antiseptic that reliably penetrates wood and is not destroyed under the influence of high temperatures
- contains natural wax, has exceptionally high dirt- and water-repellent properties
- reduces water absorption of the surface even with prolonged exposure to hot water
- prevents the formation and development of pathogenic microorganisms (microbes)
- maintains a healthy microclimate in baths and saunas
- forms a vapor-permeable (“breathable”) coating
- does not contain organic solvents, does not emit harmful substances even with constant prolonged exposure to high temperatures, has no unpleasant odor
- environmentally friendly, safe, non-toxic, non-flammable
Recommendations for use:
When processing damaged or previously painted wood, first clean it of dirt, old peeling coatings, putrefactive damage, and foreign inclusions.
Stir before use. Apply, stirring occasionally, to air-dry wood (humidity no more than 15%) at an ambient air and surface temperature of at least +5°C with a brush, roller, spray or dipping method. Apply each subsequent layer no earlier than 20 minutes and no later than 40 minutes after the previous one. The operational readiness of the steam room is achieved after 3 days of drying and subsequent heating.
Technical data
| Compound | heat-resistant acrylate dispersion, high-temperature natural microwax, special antiseptic and biocidal components, modifying, regulating and other technological additives |
| Application methods | brush, roller, spray, pour/dip |
| Dilution | allowed, but not more than 10% of the total mass of the composition |
| Diluent | water |
| Application temperature | from +5°С, relative air humidity less than 80% |
| Permissible moisture content of wood | up to 15% |
| Number of layers (when processing walls and ceilings) | in the steam room – 1 layer in other rooms - 2-3 layers |
| Number of layers (when treating floors) | 1 layer |
| Consumption per layer | 1 kg per 11–14 m² |
| Drying time (at t° +20±2°C) | interlayer drying – 20-40 minutes, complete drying – 3 days |
| Gloss coating | silky matte |
| Color | colorless |
| Machine tinting | according to the AQUATEX&EUROTEX tinting card |
| Manual tinting | Dali™ universal color pastes |
| Predicted service life of the coating (indoors) | in steam rooms and washing rooms – up to 5 years in other premises – up to 10 years |
| Cleaning the instrument | water |
| Storage and transportation | — at t° from +5° to +35°С — withstands single non-cyclic freezing for up to 30 days |
| Best before date | 2 years in filled sealed container |
| Packing | 0.9; 2.5 kg |
Compatibility with other coatings:
| SURFACE PRE-TREATMENT | 1. Pre-treatment with bioprotective impregnating compounds* * in general cases it is not required, but is allowed, if necessary, in all rooms except steam rooms | WOODMASTER™: Biosept, Anti-bug, Biosept-Trans, Biosept-Ultra*, Frost, Frost Prof, BioTOR WOODMASTER PROF™: Biosept Concentrate, Biosept-Ultra Concentrate*, Anti-bug Concentrate DALI™: Universal antiseptic ECOHOUSE™: BIO**, BIOPROF*, Temporary protection, Bleach CEDAR™: BIO**, BIOPROF* * bioprotective impregnating compounds paint wood in a greenish-pistachio shade ** bioprotective impregnating compounds paint wood a pale green shade |
| 2. Preliminary putty | EUROTEX™: Wood putty |
LKMFLOT
Code: 100952808
Category:
Impregnations and antiseptics
Brand:
Eurotex
Packaging:
0.9, 2.5
Packaging:
1
Impregnation Eurotex Sauna (Eurotex)
DESCRIPTION: The protective coating “EUROTEX-SAUNA”® is designed to protect wood under conditions of high temperatures and cyclic moisture. Provides long-term protection of wood from wood-destroying, wood-staining and mold fungi. Due to the presence of wax in the composition, it has high water- and dirt-repellent properties, and is characterized by low water absorption even with prolonged exposure to hot water. Forms a silky, colorless coating that does not interfere with the natural breathing of wood. Protects against pathogenic microorganisms. Contains wood antiseptics that are reliably blocked in the surface of the wood and do not release from the coating even when exposed to high temperatures, which makes the use of the composition in steam rooms absolutely safe for people.
PROPERTIES: forms a colorless silky protective coating, ensures a healthy microclimate in baths and saunas, increases the service life of wood, contains natural wax - exceptionally high water and dirt repellent properties, safe at high temperatures, non-toxic, non-flammable, odorless.
AREA OF APPLICATION: Indoors, including conditions of high temperatures and cyclic humidification (baths and saunas): steam rooms (except shelves), locker rooms, rest rooms, washing rooms.
WORKING CONDITIONS: Work on applying the composition should be carried out at a temperature not lower than +5°C.
SURFACE PREPARATION: Mix acrylic varnish EUROTEX Sauna thoroughly before use. Apply to dry wood that is free of dirt, dust and other coatings.
TECHNICAL DATA: Tools: Apply by brush, roller or spray. Number of layers: Apply 1 layer in the steam room (except for shelves), in the washing room 2-3 layers. Drying time: Apply subsequent layers no earlier than 20 minutes and no later than 40 minutes after applying the previous layer. If the interlayer drying time exceeds 40 minutes, then apply the composition intensively with a brush. Operational readiness - after 3 days of drying and subsequent heating. Cleaning the instrument: Clean the instrument with water before the composition dries. Consumption: (1 layer) 70 – 90 g/m? Color: Colorless.
PRECAUTIONARY MEASURES: The composition is odorless, non-toxic, non-flammable. In case of contact with skin or eyes, rinse with water. Dispose of as household waste. Keep away from children!
STORAGE AND TRANSPORTATION CONDITIONS at temperatures from +5° to +35°C. Single non-cyclic freezing is allowed.
PACKING: buckets 0.9, 2.5 kg
SHELF LIFE: 2 years from the date of manufacture
Specifications
| Binder | Modified acrylic copolymers |
| Application methods | Brush, roller, spray, dip, pour over |
| Dilution | Allowed, but add no more than 10% of the total mass of the composition |
| Diluent | Water |
| Consumption per 1 layer | 1 kg per 11-14 m2; consumption: (1 layer) 70 – 90 g/m2 |
| Drying time at 20°C | Before applying the next layer 40 minutes, complete drying 3 days |
| Gloss coating | Silky matte |
| Indoor coating service life | At least 10 years |
| Shelf life | 2 years in an airtight, unopened container |
| Tinting | At service centers |
| Tara | 0.9 l, 2.5 l |
| Price | Capacity 0.9 l - $4.5; capacity 2.5 l - $12 |
EUROTEX-SAUNA (Eurotex Sauna) – impregnation for baths and saunas
EUROTEX-SAUNA (Eurotex Sauna) – impregnation for baths and saunas with a silky-matte effect, with a high degree of protection of wood from rot, fungus, mold and blue stains.
Purpose:
The protective coating EUROTEX-SAUNA is designed to protect wood under conditions of high temperatures and cyclic humidification, typical for saunas and baths. Provides long-term protection against wood-destroying fungi and molds. Due to the presence of waxes, it has exceptionally high water- and dirt-repellent properties; has low water absorption even with prolonged exposure to hot water. Forms a silky transparent colorless coating that does not interfere with the natural breathing of wood. Protects against pathogenic microorganisms. Antiseptics are reliably blocked in the wood and do not release from the coating even when exposed to high temperatures, which makes the use of the composition in steam rooms absolutely safe for people.
Composition: Heat-resistant acrylate dispersion, high-temperature natural microwax, special antiseptic and biocidal components, modifying, regulating and other technological additives.
Properties:
- the composition of EUROTEX-SAUNA protects wood from rot, fungus, mold;
- natural waxes give the coating exceptional water- and dirt-repellent properties;
- the composition forms a colorless silky protective coating on the surface of the wood;
- the formed protective coating is safe at high temperatures;
- the absence of organic solvents in the composition makes it comfortable to use in enclosed spaces;
- The composition of EUROTEX-SAUNA is non-toxic and non-flammable.
Advantages:
- Contains natural wax;
- Has an antiseptic effect;
- Increases the service life of wood;
- Provides a healthy microclimate in baths and saunas.
Surface preparation:
The protective coating EUROTEX-SAUNA® is applied to dry wood that has been cleaned of dirt, dust and other coatings.
Application:
Apply with a brush or spray in the steam room (except for shelves) in 1 layer, in locker rooms, rest rooms and in the washing room in 2-3 layers.
Drying:
Apply subsequent layers no earlier than after 20 minutes and no later than after 40 minutes. after applying the previous layer (at +20°C). If the intermediate drying time exceeds 40 minutes, apply the composition by rubbing vigorously with a brush. Operational readiness - after 3 days of drying and subsequent heating. Work on applying the composition should be carried out at a temperature not lower than +5°C. Do not mix with other formulations. Clean the tool with water before the composition dries.
Precautionary measures:
The composition is odorless, non-toxic, non-flammable. In case of contact with eyes and skin, rinse with water. Dispose of as household waste.
Consumption: 11-14 m²/l in one layer.
Storage conditions:
Store the composition in a hermetically sealed container separately from food products at a temperature of +5° to +35°C. One-time freezing is possible for the period of transportation.
Packaging: 0.9 kg; 2.5 kg.
Shelf life: 2 years in a filled, sealed container.
Application
Work on applying the composition should be carried out at a temperature not lower than +5°C. Apply oil and leave to absorb. If necessary, apply another layer after 40 minutes. Leave to dry for 72 hours. Heat the sauna or bathhouse, wiping off excess with a clean soft cloth.
Surface preparation
Mix acrylic varnish EUROTEX Sauna thoroughly before use. Apply to dry wood that is free of dirt, dust and other coatings. When working, use a brush, roller or spray.
Number of layers
Apply 1 layer in a steam room (except for shelves - do not paint); in the washing machine, 2-3 layers.
Eurotex (Eurotex) sauna: aqualak with wax to protect wood
Drying time
Apply subsequent layers no earlier than 20 minutes and no later than 40 minutes after applying the previous layer. If the interlayer drying time exceeds 40 minutes, then apply the composition intensively with a brush. Operational readiness - after 3 days of drying and subsequent heating.
Precautionary measures
The composition is odorless, non-toxic, non-flammable. In case of contact with skin or eyes, rinse with water. Dispose of as household waste. Keep away from children!
Cleaning the instrument
Clean the tool with water before the composition dries.
Storage and transportation
Withstands single non-cyclic freezing for up to 30 days. Permanent storage at +5°C to +35°C.
