TOP 15 best electric sauna stoves -

Traditional sauna stoves are heated with wood.
But not all owners of home steam rooms agree to carry firewood and clean up the ashes. In this case, it is better to give preference to electric sauna stoves. They also warm up the room very well, allow you to maintain a stable temperature in the steam room, but at the same time they are easy and safe to use.

Before choosing a sauna stove model, determine the power of the heating device.

Not only the cost of the device, but also the size of the steam room for which the device is intended depends on this indicator.

There are other criteria that you should pay attention to when choosing. They will be described in detail below, and the rating of the best models of electric sauna stoves for 2021 will help you decide on the choice of an electric sauna stove.

Rating of the TOP 15 best electric stoves for baths in 2021

Description of electric furnaces

The rate of heating of the room is largely determined by the number of stones loaded into the heater.

Kinds

1. Models that involve laying a significant mass of stone require more time to heat up . The heat emitted by them is more uniform and soft. You can pour water onto such devices; it evaporates before reaching the heating elements. The atmosphere is close to a classic Russian bathhouse. There is another operating mode - “sauna”. To power such ovens, a 380 V power source is required.
2. Electric ovens designed to load a small amount of stones quickly heat up the steam room . You can pour water on them in small quantities and infrequently, waiting for the optimal heating temperature. Such devices are more often used in saunas, since this mode of operation contributes to their long-term operation. Installation is possible even in an apartment, powered from a regular network.
3. Thermos stoves . They have a closed type of housing with a lid at the top of the device covering the container with heated stones. With the lid open, it will become warm within a few minutes. The steam generated is quite fine and hot, like in a Russian bath.
4. Steam generators . Ideal for creating a high level of humidity in the steam room. But the air turns out to be difficult to breathe, which is why the popularity of such equipment is not very high.
5. Electric furnaces equipped with a steam generator . They have a separate container for water. Just like steam generators, they produce very moist steam.

It is possible to use an electric furnace and a steam generator together to produce high-quality, dry steam . For this purpose, moist air from the steam generator is supplied to the bottom of the heater, where it is dried and heated to the required values.

Device and principle of operation

The design of the electric furnace is not particularly complicated.

Its components:

• double-walled metal body;
• electrical heating elements - heating elements or tape type;
• heat-insulating material - steel screens located one behind the other and protecting the walls of the bathhouse from excess heat;
• cage for stones.

The rate of heating of the room depends on the mass and size of the latter . When using heavy stones of significant size, the bath will heat up faster.

The stove stove can be open or closed . The first option is more popular, since it allows not only to heat the steam room efficiently, but also to obtain steam with optimal humidity.

Closed sauna stoves can be a closed structure of a vertical or horizontal type, consisting of:

• heating element;
• conductor of electric current;
• surface that reflects the generated heat.

When the device is turned on, the heating elements begin to produce heat, from which the stones inside are heated, gradually increasing the temperature inside the bathhouse.

NOTE!

To regulate the humidity level, warm water is poured over the stones, which turns into fine steam.

Peculiarities

1. To connect the electric heater to a power source, you may need to install a separate power supply line . It is recommended to lay wires with a large cross-section (4-8 millimeters), which are heat-resistant. The wire connected to the electric meter is first connected to the RCD, and only after that the device can be used.
2. Warming up the room at maximum power can last from 30 to 120 minutes . The time period depends on the selected furnace power indicators and the quality of its thermal insulation. When the required temperature level is reached, the power of the device will need to be reduced by 1.5-2 times. Adjustment can be made in manual and automatic modes (if there is a built-in thermostat).
3. When choosing an electric heater, you should take into account the presence of additional safety requirements . The constant supply of air from outside will increase energy consumption. Insufficient oxygen supply can cause fainting or general deterioration in health. To prevent such problems, it is necessary to equip a ventilation gap under the door, at least two centimeters, or install deflector grilles at the bottom of the door, through which fresh air will flow into the steam room. Natural convection of air masses will allow the heat to be evenly distributed in the room.

How to choose an electric stove for a sauna?

The main criterion when choosing an electric oven is its power. The rate of heating of the room depends on it. But it should be borne in mind that increased power entails increased electricity consumption and load on the electrical network.

Other important selection criteria include::

1. Availability of a steam generator . Most models of electric stoves are designed to create the atmosphere of a Finnish sauna with dry steam. But, if the device has a steam generator, when it is turned on, you can create the microclimate of a real Russian bathhouse.
2. Furnace top design . It is desirable that the top of the body be lattice. Such stoves are more spacious, and if the user accidentally splashes too much water on the stones, it will not linger in the body, but will flow out.
3. Design . For many users, this indicator plays a decisive role. Most modern models from well-known manufacturers are distinguished not only by their attractive design, but also by their compact dimensions, so installation will not be difficult.

But the main feature of electric sauna stoves is that they do not need to be connected to a chimney, so they can be installed even in multi-storey buildings.

However, it is not recommended to do the connection yourself: in order for the stove to work without failures, it must be connected by an electrician.

Questions and answers

Many users, when choosing a stove for a sauna, are faced with a lot of questions. If electrical design is considered, the questions are mostly the same. It is better to answer them right away in order to save users from unnecessary worries and save them time.

Is an electric stove suitable for a Russian bath?

There is an opinion that metal stoves are generally not suitable for a Russian bath. Moreover, electric structures with a small heater - you cannot throw water on it, as it will fall on the heating elements. However, if the heater is massive (from 100 kg), the heater can be used in the traditional way, since the water will have time to evaporate completely and will not reach the heaters. Therefore, for a Russian stove you just need to choose a suitable model.

How to determine the required power of an electric furnace?

This is done based on the volume of the room. First, calculate it, and then select a suitable model at the rate of 1 m3 per 1 kW of power. At the same time, it is recommended to make a small reserve, since heaters lose their performance over time.

Some sources claim that an electric oven and a steam generator are incompatible. Is it so?

This is an erroneous statement. There are models of electric heaters equipped with a built-in steam generator. Therefore, both devices are quite compatible. Moreover, for some models a steam generator is the only way to create the desired microclimate in the steam room.

Is it possible to connect the oven yourself?

If the stove is under warranty, installation and connection are performed by specialists from the warranty workshop (or service center). This is the best option that always gives the expected result. However, it is not always possible to invite specialists. Therefore, many owners have to perform this procedure themselves.

Where is the best place to place the remote control?

The remote control is usually installed near the entrance. It is not recommended to install it in a steam room (for some models there is a direct prohibition on such installation). If the control is located outside the steam room, it is much more convenient to start heating, change the mode, and turn off the stove.

Final points

A sauna with an electric stove is a powerful consumer of electricity. When choosing, it will be very important to pay attention to the electricity consumption of the stove; this will save significant amounts, even if the stove is quite expensive.

From an aesthetic point of view, foreign models are superior to their Russian counterparts, but they are also more expensive. Specific options should be considered based on financial capabilities when purchasing, as well as taking into account the volume of the steam room and the power that the electrical wiring and transformer can withstand.

Material of manufacture

Electric heaters are made from the following materials.

• Cast iron stoves. They have a lot of weight, but retain heat well.
• Enameled steel. A little in demand option.
• Stainless steel stoves. The most comfortable and current models, which are famous for their durability.

Nuances of operation

The electric furnace does not require particularly careful maintenance, but you still need to follow the basic rules of its operation. The main point is compliance with the rules of electrical safety and ventilation of steam rooms.

Do not allow water to come into contact with wires or electrical heating parts of the oven. In the steam room, you should always ensure the minimum permissible air circulation. To avoid rapid burnout of the heating elements, the load must be applied smoothly immediately after starting the furnace.

Top 1. Tylo Sense Elite 10

Rating (2021): 4.95

The most reliable oven A powerful electric oven designed for continuous operation even under maximum loads.

• Characteristics

  Average price: RUB 152,300.

• Country: Sweden
• Heated volume (cub.m): 18
• Power consumption (kW): 10.5
• Construction: wall
• Dimensions (W/D/H): 43/60/37 cm
• Weight (kg): 35

Many will probably be shocked by the price tag of this heater, but it should be understood that the equipment is designed for the highest loads. The manufacturer specializes in professional equipment for baths, saunas and spas. Here is the best assembly and only the most reliable materials. The device is controlled from your own tablet, in which you can set different modes and even combine them in your own order. The device is not afraid of moisture and is equipped with its own steam generator. There is also a container for aromatic liquids. The programmed modes include Russian and Finnish baths, as well as a sauna with aromatherapy and a spa. In general, maximum equipment and top performance.

Advantages and disadvantages

• Reliable device
• Many programmable and custom modes
• Maximum optional equipment
• Convenient control

• Very high price
• A rare guest in retail stores

See also:

• 10 best stoves for Russian baths in 2021

to the beginning of the rating

Criteria for choosing an electric heater

When planning the arrangement of a sauna or bathhouse, you should pay attention to proper ventilation and purchase a suitable model of electric heater. First of all, before purchasing, it is important to decide on the type of installation of the equipment - this is what you should start from when choosing a stove.

Installation type and shape of the electric heater

In a small room, it is better to place a wall-mounted device or a floor-standing unit in the shape of a tall, narrowed cylinder. They will not overload the interior and will not “eat up” the usable area of ​​the room.

For large steam rooms, any variety of models is suitable.

The outer body of the furnace can be open or closed. The first one stores valuable heat inside longer and releases moist steam, while the second one quickly warms up the room and makes the air as dry as possible.

Oven power and brand

Furnace power is one of the most important parameters. It is calculated based on the area of ​​the steam room. Nominally, 1-1.5 kW is required to warm up 1 cubic meter.

It is better to buy a device with some reserve. Then it will normally withstand the operating load and work for the entire period promised by the manufacturer.

But when choosing the power of the equipment, do not forget about your wiring - to connect a powerful electric furnace, you should allocate a separate line, and if the house has old wiring, then you need to make sure that its cross-section will be sufficient for the model you like.

It is also worth paying close attention to the size of the internal chamber for stones. For small saunas and baths, a volume of 20-26 kg is enough. For large double rooms, it is worth purchasing models with a capacity above 50 kg.

If the sauna/bathhouse has poor-quality thermal insulation and thin load-bearing walls, it is advisable to buy an electric heater with a large power reserve. Otherwise, you won’t be able to steam with pleasure. A weak model will physically not be able to cover current heat losses

The manufacturer's brand also matters. Devices from European brands are traditionally considered to be of higher quality, but are sold at a higher price.

Domestic and Chinese models are cheaper. It is among them that you can find technologically simple, but high-quality and reliable budget stoves for household use.

Popular models

1. Polytechnic Cristina Classic. The model is suitable for a steam room with a volume of 10 - 15 cubic meters. meters, its power is 10 kW, the weight of stones is 25 kg, the price is 16,800 rubles.

2. Stream Gross 1 Heat boost. The stove is suitable for steam rooms with a volume of 8 - 14 cubic meters. meters, its power is 10 kW, the weight of the laid stones is 31.7 kg, the cost is 36,600 rubles.
3. Narvi NM600. Finnish product, recommended steam room volume 6 - 9 cubic meters. meters, furnace power 6 kW, weight of stones 30 - 40 kg, cost - 13,200 rubles.
   Read also:  How to make a chimney from a steel pipe with your own hands?
4. Helo Himalaya 105DE. An electric furnace of Finnish-German production with a power of 10.5 kW is capable of heating a steam room with a volume of 9 - 15 cubic meters. meters, the weight of the stones being laid is 100 kg, it costs 50,500 rubles.

5. Harvia Cillindro PC70E Steel. Stove from Finland for steam rooms with a volume of 6 - 10 cubic meters. meters, power 6.9 kW, weight of laid stones 90 kg, cost - 17,400 rubles.

6. Tylo Combi Compact RC3. Swedish low-power stove of 3 kW, suitable for rooms with a volume of 1.5 - 4.5 cubic meters. meters, the weight of the stones is only 7 kg, the price is 67,000 rubles.

7. Tylo Expression 10. A more powerful electric sauna stove with a capacity of 10 kW, for steam rooms with a volume of 10 - 18 cubic meters. meters. It contains 12 kg of stones, and the price is 97,000 rubles.

8. Tylo SD 20. Powerful 20 kW device, for rooms with a volume of 22 - 43 cubic meters. meters, the weight of the stones being laid is 32 kg, the cost is 91,000 rubles.

9. Thermofor Primavolta. This Russian-made electric sauna stove can heat a room of up to 5 cubic meters. meters, its maximum power is 9 kW. It holds 50 kg of stone and costs 12,000 rubles.

10. Dushka EKM-18 NMT. Russian powerful 18 kW stove for large steam rooms of 21 - 30 cubic meters. meters. You can put 65 kg of stone in it, the price is only 12,300 rubles.

Dimensions

The smaller the sauna, the more important the size of the stove becomes. Low-power heaters are usually very modest in size. As an example, we can mention the Harvia Compact stove - its width is 24.5-30 cm, depth 22 cm, height 54 cm. It weighs only 9 kg (without stones). Another model from the same company - Vega Compact - weighs even less: 7 kg and has dimensions: 28x29.5x50.5 cm.

IMPORTANT! Information on sizes is essential for selection, therefore it is always indicated in catalogs.

Yes, and one more interesting point : ovens of the same size (within the same line) can have different power. This allows the manufacturer to reduce production costs, and the consumer to choose a standard-sized heater for the volume of the steam room.

Further information will be useful to those who have already purchased a stove and need information on how to properly install and connect it.

Advantages

Unlike a wood stove, which is more complex to use, electric stoves are renowned for their simplified operation.

They have many advantages that set these stoves apart from their peers.

• The electric heater quickly heats the steam room and retains heat for a long time;
• A variety of sizes allows you to choose the appropriate option;
• The unit can be installed without coordination with various services;
• Installation is simple and accessible;
• There is no need to install a chimney for an electric heater;
• Easy and convenient operation;
• The device has overheating protection;
• High thermal insulation performance;
• No carbon monoxide;

Top 2. Harvia Vega BC90

Rating (2021): 4.81

Best value for money Powerful heater from a top manufacturer with high performance and an attractive price tag.

• Characteristics

  Average price: 25,300 rub.

• Country: Finland
• Heated volume (cub.m): 14
• Power consumption (kW): 9
• Construction: floor
• Dimensions (W/D/H): 54/48/31 cm
• Weight (kg): 45

Top brands rarely please customers with affordable price tags, but now we have before us a powerful heater with several operating modes and the most attractive price. The stove is designed for 14 cubic meters of heated area. Energy consumption – 9 kilowatts. It is possible to connect to both single-phase and two-phase networks. Several working heating elements are securely covered with a thick layer of stones, so they are not afraid of accidental splashes and moisture. You can pour water on the stones, which is very important, since there is no steam generator in the design. The rear wall is equipped with a special protective screen, that is, the stove can be placed directly against the wall and does not require additional insulation in the form of a metal sheet.

Advantages and disadvantages

• Optimal ratio of characteristics and price
• Convenient control
• Not afraid of large amounts of moisture
• No need to protect the wall during installation

• No steam generator
• Side control handles

Top 2. Harvia KIP60

Rating (2021): 4.82

Fast heating A stove with three working heating elements, which almost instantly reaches the set mode and warms up the room in a matter of minutes.

• Characteristics

  Average price: 21,800 rub.

• Country: Finland
• Heated volume (cub.m): 8
• Power consumption (kW): 6
• Construction: wall
• Dimensions (W/D/H): 41/28/60 cm
• Weight (kg): 16

Electric oven from one of the most famous Finnish manufacturers. The device is designed to heat a room with a volume of up to 8 cubic meters. True, energy consumption is quite high, 6 kilowatts. For convenience, it is possible to connect to both household networks at 220 volts and two-phase at 380. The stove is distinguished by a quick set of the desired temperature, which is due to three heating elements hidden under 14 kilograms of natural stones. Heating of the room occurs in a matter of minutes, and numerous modes allow you to use the stove on an ongoing basis. It is enough to set the required temperature and humidity so that the desired microclimate is always maintained in the room.

Advantages and disadvantages

• Quick temperature set
• Three working heating elements
• Compact size
• High quality build

• High price
• High power consumption