How to choose a stove for a sauna: 13 best electric, wood and gas stoves

Updated: 02/19/2021 18:37:11

Expert: Konstantin Borisovich Polyakov

*Review of the best according to the editors of expertology.ru. About the selection criteria. This material is subjective in nature, does not constitute advertising and does not serve as a purchase guide. Before purchasing, consultation with a specialist is required.

Baths and saunas are popular in all regions of our country. Today, many private property owners are erecting modern buildings on their property for recreation and water procedures. One of the important elements in them is the stove. It should heat the steam room to a high temperature, creating a pleasant, humid microclimate. Today, domestic users are offered a wide range of heating elements. They differ in price, purpose, and design. Experts advise paying attention to several important points.

How to choose a stove for a bath

• Thermal power. The main selection criterion. It should be sufficient to heat the steam room and adjacent rooms in half an hour in the summer, and in 2 hours in winter when it’s cold. For a stove with moderate capabilities, the average figure is close to 10 kW.
• Heat storage capacity. The steam should not be transparent. For normal operation, 100 g of water per 1 m3 is sufficient. The temperature should not fall below 100˚C, otherwise the steam will come out heavy and damp.
• Material. Chromium steel is the best option. There is no risk of burning oxygen. There are also models made of cast iron and ordinary steel.
• Duration of work. The oven should operate for at least 3-4 hours and retain heat for a long time. Models that cool quickly will have to be re-ignited each time.

Important parameters:

• Type of fuel. Firewood, gas and electricity. The wood-burning copy is traditional. It guarantees fast, uniform heating and a favorable microclimate. Comes with or without chimney. In its absence, the fumes escape through the vent.

Electric is the modern way. Features precise temperature control. For normal operation, a stable supply of electricity is required.

The gas model implies complete independence. It lends itself to automation. Suitable for those who have low gas tariffs in the region.

• Type of heater. When the system is open, the air is heated by hot stones. This stove quickly heats the steam room and is suitable for frequently visited baths. Closed increases the time it takes to warm up the room.
• Availability of a heat exchanger. Allows you to save firewood and maintain a high temperature in the bathhouse.

• Design. The stove can be of any size, shade and shape.
• Price. The cost for a moderately powerful model does not exceed 20,000 rubles.

Secondary parameters:

What to look for when choosing a stove?

We have already figured out the pros and cons of the best models of gas, wood and electric stoves, and also looked at how exactly these three types differ. However, when choosing such equipment, you need to look at several criteria at once - this will allow you to choose a truly ideal model for you.

The first criterion is power . This is the main criterion. It is clear that the greater the power, the faster and better the steam room will warm up. However, here it is necessary to take into account the area of ​​the room, otherwise the device simply will not work correctly: if it is too powerful, the steam room will heat up quickly, but then the stove will stop heating, therefore, the stones will be cold. And if, in order to save money, a low-power stove was purchased, it will have to work hard to properly warm up the steam room. Therefore, it will break quickly.

Be sure to calculate the volume of the room by multiplying its length by width and height. Also consider any uninsulated areas, such as tiled areas or windows. If the window has a length and width of 60 cm, you need to multiply 0.6x0.6, and the resulting number by 1.2. The result will be 0.432, and this number must be added to the total volume of the room. And if suddenly the door to the steam room is made of glass, the total volume is multiplied by 1.5.

Note! So, for example, after all the calculations you get that the stove should heat a room with a volume of 9.5 m3. Then a stove capable of heating a steam room of 6-9 m3 will clearly not be enough - it is better to buy a device “with a reserve”, i.e. heating a steam room for 12 m3. But the devices for a large steam room, 20 meters there, will be too much.

The main criterion that needs to be taken into account when choosing a stove is its power, which is important to calculate taking into account the volume of the room.
The second criterion is the capacity of the heater . Everything is simple here: the more it holds, the better. A lot of stones will produce a lot of steam, and that's exactly what we need. Of course, for small steam rooms, 25-40 kg of stones will be enough, but for larger ones, 70-80 kilograms are better.

The third criterion is the type of heater . Closed ones can heat the stones even up to 500 degrees, and this will create a really “light steam”, while open ones usually create a temperature of 250-300 degrees, and the steam is more humid. In addition, stoves with open heaters heat up much faster.

The fourth criterion is how long the stove will operate without additional fuel . If it is enough to “fill” it once and then forget about it for a long time, without interrupting the procedures, this is an ideal option.

The fifth criterion is the body material . Typically, you can most often find stoves made of steel - it is quite durable and heats up quickly. A rarer option is cast iron, although it is also very good. It’s difficult to determine a favorite here: both types “work” perfectly. Of course, there are also brick stoves, but you can’t buy them - you can only pay for the services of a stove maker who will build a brick stove in your steam room.

The type of heater and its capacity, the material of the body are also important.

These parameters are decisive when choosing high-quality stoves for a bath. If this is important to you, you can also take into account the weight and size of the stove, location in the room - this will allow you to find the most suitable place for such equipment in the steam room.

The best sauna stove with a water tank

Termofor Kalina Carbon is easy to use, compact and not inferior to premium options in terms of capabilities and build quality.

It has a logical and convenient arrangement of controls, all parts fit tightly together, the body is black with a matte texture made of structural steel - a material resistant to corrosion and scratches.

Panoramic glass for relaxation, internal loading of stones up to 95 kg using a pull-out compartment for long-term heat retention.

A chimney labyrinth to increase the efficiency of the stove and a built-in heat exchanger for heating water in the tank.

Characteristics:

• Volume – 30 m3.
• Power – 15 kW.
• Weight – 96 kg.

Pros:

• High power. Heats a large sauna area.
• Built-in heat exchanger. To improve microclimate indicators.

Minuses:

• Restrictions. Not suitable for a small bath, only for a large one due to its dimensions.
• Economical material. Loses to models made of steel and chrome.

Criterion No. 1: Thermal power

The main requirement that a heater must meet is optimal power indicators for a steam room. A stove that is incorrectly selected in terms of power will not allow you to create comfortable conditions in the room. A unit with a large capacity reserve will quickly warm up the room, but the steam room will be too hot, and instead of light transparent steam, whole clouds of water will evaporate from the stones. The other extreme is choosing a low-power unit for reasons of saving on purchase and maintenance. With such equipment, the sauna will take longer to warm up, and the stove will work at the limit of its capabilities, which can lead to rapid wear of parts.

Factory markings will help you choose a sauna stove based on heat output. The technical documentation must indicate what room dimensions (in cubic meters) the model is designed for.

Important! If the bathhouse cannot boast of high-quality thermal insulation, choose a heater designed for a larger room - with a margin of about 15-20%.

"Rus" 12 L

Characteristics:

• steam room volume – from 6 to 12 m3;
• door design – solid;
• laying firewood - from the dressing room;
• weight of stones – 50 kg;
• device weight – 43 kg.

Cost – from 12,530 ₽.

Link to the product:

Kamenka "Rus" received the well-deserved title of "people's" stove - for its affordable cost and good performance. It is designed for heating medium-sized steam rooms, the volume of which does not exceed 12 m3. The special design allows you to heat the air efficiently without drying it out, and thanks to the large mass of stones, you can get a lot of steam - just like in a real Russian bathhouse. The stones are heated by the smoke collector - the hottest part of the apparatus, and the small area of ​​the heating surfaces ensures moderate heating of the steam room.

Advantages:

• simplified chimney installation;
• uniform heating of the room without drying out the air;
• capacious heater;
• large volume of steam.

Flaws:

• relatively heavy weight;
• unpleasant odor during the initial stages of operation.

“Siberia Panorama” 30 lux

Specifications:

• room volume – from 20 to 30 m3;
• heater type – open;
• door type – panoramic with glass;
• chimney diameter – 115 mm;
• weight of stones – 90 kg;
• product weight – 59 kg.

Price – from 31,310 ₽.

Link to the product:

The TOP sauna stove continues the model, which is popular among lovers of the classic sauna. A well-thought-out design with a large area of ​​hot surface allows you to simultaneously warm up not only the steam room, but also the dressing room, shower room, and rest room. Due to its high power, the device is suitable for installation in large rooms, the cubic capacity of which reaches 30 meters. The model is characterized by rapid heating - in 30 minutes the temperature reaches 100 °C, producing comfortable dry steam.

Advantages:

• ultra-reliable – firebox made of high-strength alloy steel;
• rapid warm-up in half an hour;
• built-in heat exchanger register for heating water in a remote tank;
• fireplace glass door for viewing the flame.

Flaws:

• The kit does not include chimney elements;
• consumes a lot of fuel;
• high price.

Back to Contents

The best stove for a bath with a heat exchanger

Ermak 12 belongs to the economy class line, but this does not indicate poor quality. Material – stainless steel with chromium content. It is resistant to corrosion. The oven has standard dimensions for its class: 425×520×690 mm. Weight – 52 kg.

The weight of the laid stones is 40 kg. This indicator requires longer heating of the raw materials. A remote tank and heat exchanger are included in the package.

Characteristics:

• Power – 12 kW.
• Working area – 14 m3.
• Zone for stones - 40 kg.
• Firewood length – up to 450 mm.

Pros:

• Rich equipment.
• Moderate microclimate. The water in the stove is hot, but does not boil.
• Price. Low price.

Minuses:

• The stones heat up slowly.

What to consider when purchasing

1. The area and height of the steam room is one of the main criteria for correctly purchasing the best wood-burning stove for your bathhouse; this is the cubic capacity of the room that it will heat.
2. The size of the space planned for installing the stove.
3. The desired material for the manufacture of a wood-burning stove, or rather its firebox. Stainless steel is usually used low-alloy, up to 2-3 mm thick, which leads to its deformation during operation. Structural steel is used from 5 to 10 mm, but over time it is susceptible to corrosion and there is a possibility of damage to the integrity of the welds. Cast iron is rated as the best material for making wood-burning stoves for bathhouses, but the cost of such stoves is 1.5–2 times higher.
4. Do you want an open or closed heater? A closed stove heater produces more comfortable and moist steam, but it takes longer to warm up the steam room and takes longer to cool down after the process is completed.
5. Do you need a standard or extended combustion chamber? A stove with a firebox extended to the thickness of the wall is used if it is planned to heat it not from the steam room, but, for example, from the dressing room.
6. Do you need a built-in tank for heating water? On the one hand, a built-in tank increases the cost and complicates the design, on the other hand, purchasing a separate tank will entail the problem of choosing a place for its location and usually leads to even greater costs.

The best stove for a cast iron bath

The relevance of Hephaestus PB-01 is explained by its high power. It is capable of heating a large room with a volume of up to 45 m3. The thick walls of the structure quickly transfer heat.

The highest efficiency (87%) among sauna stoves is a key feature. The stove can withstand high heat loads – up to 750 °C. Turbulent fins make it possible to reduce heat transfer in the chimney to 300˚C.

Characteristics:

• Power – 18 kW.
• Weight of stones – 70 kg.
• Firewood length – up to 400 mm.
• Dimensions – 71.1×5×88.7 cm.
• Weight – 350 kg.

Pros:

• Reliability.
• Large working area. Suitable for a large project.
• Efficiency. Heats rooms quickly and retains heat for a long time.

Minuses:

• High price. Doesn't differ in availability.
• Heavy weight. The floor must be strong in the bathhouse.
• Mandatory brick lining. A measure against heating the walls and fire.

Bath stove Vesuvius Legend Forging 12 (260)

view product

The Vesuvius Legend Forging sauna stove 12 (260) is suitable for a steam room with a volume of 6-14 cubic meters. m, which can be ready for use in just 50-70 minutes. Structurally, the model consists of three parts, cast from cast iron 12 mm thick, fastened with bolts. To seal the joints, a ceramic cord that can withstand temperatures up to 1200°C is used. The remote firebox of the device is equipped with a removable bumper, which allows you to adjust the rotation of the flame, increases efficiency, and makes it easier to remove soot. Forged mesh is made of textured steel strip coated with heat-resistant paint and patina. It allows you to fill in a lot of stones, thanks to which the steam room retains heat for a long time, the steam is soft, and there is reliable protection from infrared radiation. The airtight door made of cast iron with heat-resistant glazing allows you to admire the flame.

8

The best stove for a sauna at the dacha (heater)

Typically, garden and country baths are focused on quick heating. Varvara Mini has small dimensions and weight. It is compact and efficient.

Creates the desired microclimate in the room after switching on in half an hour. Fast heating occurs due to double convection. It warms up not only the volume of the bathhouse, but also its walls, floor, and ceiling. The weight of the laid stones is 40 kg. The maximum length of firewood is 30 cm.

Features include the ability to be equipped with a remote/mounted tank. Both systems are made of stainless steel. The remote one is suitable for installation on the second floor or as a pass-through part through the ceiling. The water boils in it within an hour.

Characteristics:

• Power – 8 kW.
• Working area – 8 m3.
• Weight – 85 kg.

Pros:

• Weight. Suitable for a small bath.
• Window on the back for easy maintenance.
• Equipment.

Minuses:

• Regular design. May appear unattractive.
• Restrictions. Suitable for country baths.

How to choose and what to pay attention to?

First of all, it is worth paying increased attention to the quality of thermal insulation . The role of insulation is usually performed by a layer of air between the steel sheets that make up the body of the electric furnace. Some models are faced with tiles or natural stone.

This design makes it possible to increase the safety of using the unit, protecting against burns when touching the body.

Another important aspect when choosing an electric heater is the device control mechanism . It can be equipped with a built-in control panel, a mobile remote control, or a combination of both elements.

Another criterion is the level of required voltage in the electrical network . There are units with requirements of 220 or 380 V. The second option is more economical, but it is less often found on sale.

The built-in container allows you to always have a supply of hot water on hand for washing while the electric stove is running, and also more effectively humidify the air in the steam room.

Material of manufacture

The following types of materials are used for the production of electric heaters::

• cast iron - durable and retains heat well, but is heavy;
• enameled steel is an inexpensive but not very common option;
• Stainless steel is the most popular material, characterized by durability, aesthetics and good heat dissipation.

Heater type

Heaters vary in volume. It is the stones that produce heat and allow steam to form.

For a compact sauna, 2-2.5 kilograms of stones may be sufficient . In a large room, you need to install a stove that can fit at least 6 kilograms of stone into the heater.

Furnace design

According to the type of design, electric sauna stoves are divided into open and closed . To generate a significant amount of dry steam, open-type heaters are used.

If you only need a little steam, it is better to choose a stove with a closed heater, which will retain heat longer.

Installation method

Based on the installation method, electric furnaces are divided into wall-mounted and floor-mounted structures. Mounted electric heaters have a low power level and are usually used in saunas and bathhouses of modest size.

The range of floor-standing devices is distinguished by a large selection. You can find both compact low-power ovens and powerful, large devices powered by a voltage of 380 V.

Heated volume

The power level of the electric furnace is selected according to the following indicators:

• 1 kW of power * 1 m3 of steam room.

This calculation is valid for steam rooms that have high-quality insulation of wall surfaces, ceilings and floors.

The best stove for a sauna with a closed heater

Vesuvius Skif is made of gray steel with a matte surface. The door has many forged decorated elements in a golden hue. The built-in heater, heating up to 400˚C, allows you to get “light” steam.

To “plug” the convection part, the oven is equipped with a grate.
The element holds stones along the entire perimeter of the body. Proper air circulation allows you to heat the room in 1 hour. Characteristics:

• Power – 15 kW.
• Volume – 24 m3.
• Weight – 91 kg.

Pros:

• Large heated area.
• "Light" steam. It will be comfortable in the bathhouse.
• Safety.

Minuses:

• Large mass. Quite a heavy model.

Sauna stove Etna Storm 18 (DT-4S)

view product

Sauna stove Etna Storm 18 (DT-4S), suitable for steam rooms with a volume of 12-24 cubic meters. m, characterized by excellent thermal power and a long service life. It is made from heat-resistant cast iron 8 mm thick, which practically does not emit infrared radiation and maintains its integrity when water is poured onto it. The built-in closed-type heater makes the device universal, allowing it to be used to equip a sauna and Russian bath. An open steel mesh made of calibrated rod holds about 220 kg of stones. The remote-type firebox is made of three elements, bolted together and sealed with a ceramic cord capable of withstanding heat of 1200°C. Its door is made of cast iron, complemented by heat-resistant glazing.

Advantages

• equipped with a cast iron combustion door with glass and a convection-ventilated casing;
• large load of stones;
• a large mass of stones;
• presence of glass in the door.

Flaws

• no heat exchanger;
• no water tank.

7

The best electric stove for a sauna

Harvia Sound M45 is made of steel. Powered by network. Power supply type – 3-phase. The Finnish-made wall-mounted model comes with a built-in remote control with a thermostat and timer.

The stove can be equipped with loudspeakers for music. The safe installation distance from the wall is 3.5 cm, to the ceiling – 110 cm, to the floor – 15 cm.

Characteristics:

• The size of the steam room is up to 6 m3.
• Power – 4.5 kW.
• Electric heater time – up to 4 hours.
• The weight of the stones is 25 kg.
• Weight – 16 kg.

Pros:

• Compactness. Doesn't take up much space.
• Delayed start function. After the specified parameters, it turns on independently after a few hours.
• Modern technologies. There is an opportunity to listen to music.

Minuses:

• Small work area. Designed for several people.

Bath stove Sibir-24 (panorama)

view product

The wood-burning sauna stove Siberia-24 is designed for fairly large rooms, the volume of which is from 12 to 24 cubic meters. m. The model is made of cast 10 mm cast iron, therefore it is distinguished by high reliability, performance, heat capacity, serves for a long time, is not afraid of thermal fluctuations, moisture, and is not subject to corrosion or deformation. The structural elements are connected to each other by bolts and sealed with a heat-resistant cord, which guarantees strength and tightness. The deep firebox allows you to lay even long firewood, and brown coal can be used as an alternative fuel. The device does not burn oxygen in the steam room, it produces light, pleasant steam that promotes complete relaxation and healing during bathing procedures; the door with panoramic glazing makes it possible to admire the flames.

9

The best gas stove for a sauna

Teplodar KomPAR 50 is a rare type of heat generator for a bath - gas stoves are expensive, and they are purchased for commercial purposes. Installation requires permission and drawing up an individual design plan.

Features of the product: the steam room heats up in less than half an hour, automatic temperature adjustment, and no need to clean the tank.

There is no need to constantly load fuel - add firewood. A tray for stones is installed on top of the structure, and there is also a removal device for combustion products.

Characteristics:

• Heated volume – 70 m3.
• The thickness of the firebox walls is 0.6 cm.
• Fuel - firewood.
• Weight – 130 kg.

Pros:

• Compactness. Doesn't take up much space in the steam room.
• Easy to use. Does not require careful care.

Minuses:

• High price. It's very expensive.
• Complicated installation. You will need to go to authorities to fill out the paperwork to get permission for installation.

The best cast iron stoves

A cast iron stove is considered the best choice for a sauna. The material is durable and resistant to high temperatures, due to which the unit lasts more than 10 years. The rating includes models from the best manufacturers with high power.

Hephaestus PB-04 MS

The stove is made of alloy cast iron . Due to its unique shape and 40 mm thick walls, it quickly heats up to a temperature of 500 ⁰C. Despite the thick walls, the heat spreads quickly. The room is maintained at a comfortable temperature for a long time.

Characteristics:

• dimensions - 39.40x56x64.50 cm;
• weight - 130 kg;
• heated volume - 15 m³;
• power - 8 kW;
• type - closed;
• Efficiency - 87%;
• secondary afterburning - yes;
• ash box - yes;
• chimney diameter - 11.5 cm.

Advantages:

• cast iron body;
• spacious ash drawer;
• stylish door;
• optimal dimensions;
• convenient connection to the chimney;
• holds up to 180 kg of stones.

Flaws:

• high price;
• heavy weight.

Hephaestus PB-04

A furnace made of alloy cast iron, which is characterized by high performance and rapid heating to maximum temperature.

The steam is distributed evenly, which eliminates the risk of burns when exposed. Due to the convection ribs on the sides, heat transfer from burning wood increases.

Characteristics:

• dimensions - 39.40x56x64.50 cm;
• weight - 130 kg;
• heated volume - 15 m³;
• power - 8 kW;
• type - closed;
• Efficiency - 87%;
• secondary afterburning - yes;
• ash box - yes;
• chimney diameter - 11.5 cm.

Advantages:

• spacious compartment for stones and firewood;
• environmental friendliness;
• long service life;
• attractive appearance;
• high-quality case;
• built-in ash drawer.

Flaws:

• difficulties with installation (formation of a reinforced base);
• high price.

Vesuvius LEGEND STANDARD 16 (DT-4S)

A stove with powerful characteristics from a well-known Russian manufacturer . Made entirely of steel, it is therefore distinguished by high quality and heat dissipation. Warms up a room up to 18 square meters in a short time.

Characteristics:

• dimensions - 56x70x69 cm;
• weight - 117 kg;
• heated volume - 18 m³;
• power - 16 kW;
• secondary afterburning - yes;
• ash box - yes;
• chimney diameter - 12 cm.

Advantages:

• holds up to 120 kg of stones;
• attractive design;
• high performance;
• fast heating;
• easy care;
• glass self-cleaning system.

Flaws:

• some elements are made of steel;
• the need to apply a protective coating.

Vesuvius LEGEND FORGING 16(270)

A high-quality cast iron stove that provides comfortable conditions for the steam room . Has an attractive design. The wall thickness is 1.2 cm, which ensures rapid heat distribution in the room.

Characteristics:

• dimensions - 56x70x69 cm;
• weight - 98 kg;
• heated volume - 18 m³;
• power - 16 kW;
• type - closed;
• secondary afterburning - yes;
• ash box - yes;
• chimney diameter - 12 cm.

Advantages:

• high-quality construction;
• large ash box;
• high performance;
• heat-resistant glass door;
• remote firebox.

Flaws:

• rusts with frequent use;
• needs to be treated with a special compound.

Vesuvius Sensation 16 Anthracite (270)

A stove with excellent characteristics and attractive appearance . Provides quick heating of the room due to the dense walls of the firebox. It has compact dimensions, so it is suitable for a small steam room.

Characteristics:

• dimensions - 41x64x69 cm;
• weight - 99 kg;
• heated volume - 18 m³;
• power - 16 kW;
• type - closed;
• secondary afterburning - yes;
• ash box - yes;
• chimney diameter - 12 cm.

Advantages:

• attractive design;
• capacity up to 60 kg of stones;
• spacious ash drawer;
• fast heating;
• self-cooling and self-cleaning system;
• high quality coating.

Flaws:

• high price;
• Difficult to install due to heavy weight.

The best wood-burning stove for a sauna

Kastor KO-20 has a modern design - matte surface, no frills, convenient opening systems. It is practical and elegant in appearance.

The main idea is the presence of enhanced live fire due to the glass door. It occupies almost the entire front panel.

The container for stones is designed for 60 kg. The double casing is another advantage. It is needed to reduce the safe distance for accelerating air exchange.

Characteristics:

• Power – 18 kW.
• Volume – 20 m3.
• The maximum weight of stones is 60 kg.
• Weight – 99 kg.

Pros:

• Design. Fits into a modern bathhouse.
• Light steam. Creates comfort in the room.
• Relaxation. View of a burning fire.

Minuses:

• Restrictions. For kindling, use wood chips and splinters, then firewood. Do not use birch. After this you will have to clean the firebox window.

Sauna stove Vesuvius Optimum Standard 14 (DT-3)

view product

The wood-burning sauna stove Vesuvius Optimum Standard 14 (DT-3) is designed for use in rooms whose volume does not exceed 14 cubic meters. m. It is made from 5 mm structural steel and is equipped with a cast iron grate and door. There is a 200 mm combustion tunnel, due to which the device can be located outside the steam room. A deep open heater has a lot of stones, which, due to its special shape, heat up well, ensure temperature stability, and are an excellent steam generator. The heating surfaces of the device are surrounded by a convector casing, which significantly accelerates the heating of air masses in the steam room and screens infrared radiation. The grate, made of cast iron, guarantees uniformity and high power of fuel combustion.

Advantages

• inexpensive model (cost within 500 rubles);
• a large mass of stones placed in the stove;
• simplified firebox structure;
• long grate made of massive cast iron;
• the presence of a remote firebox.

Flaws

• no built-in heat exchanger;
• minimum permissible metal thickness in the firebox.

3

The best stove for a long-burning sauna

Tulinka NVU-150 has a non-standard design - in the form of an iron barrel on legs. It is capable of heating air with a volume of 150 m3. Works on wood, cardboard. Coal will not work.

The firebox is the inner cylinder, the outer one is used as a convector casing. Cold air is sucked in by two holes at the bottom. It comes out hot through the top ten holes.

The temperature is regulated by two dampers. One of them is intended for supplying air to the firebox, the other for chimneys. Smoldering wood contributes to 8-hour heating of the bathhouse with the dampers closed.

When they are open, the wood burns, that is, the room quickly warms up (10-15 minutes).

Characteristics:

• Manufacturer – Russia.
• Material – steel.
• Power – 8.4 kW.
• Weight – 48 kg.
• Service life – 20 years.

Pros:

• Quick heating of the room.
• Large working area.
• Versatility. Suitable for country houses, cities.

Minuses:

• Design. Simplicity and rough lines of the body.

Which sauna stove is better, steel or cast iron?

The best metal stove for a bath

Termofor Geyser is a classic option in design and functionality. Made of heat-resistant black alloy steel - this is a reliable material. Wall-mounted, belongs to the closed type. Combined fuel. The oven is designed to produce steam and heat water.

Standard features include an ash drawer and flame level adjustment. The walls of the firebox are 0.3 cm thick. It is divided by the heater into two parts - open and closed.

In the first, steam is formed, in the second it is dried. A dosing valve built into the funnel to prevent large amounts of water from entering.

Characteristics:

• Heating volume – 18 m3.
• Firebox volume – 40 l.
• The length of the firewood is 50 cm.
• Dimensions – 41.5×90×83 cm.
• All – 59 kg.

Pros:

• Easy to use. It is connected to the chimney at the top, there is protection against water getting inside.
• Reliable case. Made of heat-resistant steel.
• Laconic style. Will fit into any bathhouse idea.
• Small mass. You can easily move it when arranging the territory.

Minuses:

• Noise. Noise when wood is actively burning.
• Working area. For a small bath.

Rating

Termofor Osa

First on the list is the TMF Osa oven. The rating of sauna stoves describes in more detail the characteristics of the NK model. Such a device is designed for heating a room with a volume of up to 9 cubic meters. The device is made specifically for “Russian baths,” which means it will provide all the necessary conditions for the feeling of a real Russian bathhouse, with a comfortable temperature and sufficient air humidity. The NK model is the most compact of the entire range from the manufacturer Termofor, equipped with an additional convector.

The chimney is located centrally to facilitate installation. The device also includes a heater with ventilation, thanks to which heated stones successfully distribute heat throughout the room. It is allowed to use firewood, peat briquettes or pellets as fuel. The model is made of heat-resistant steel with the addition of chrome, the door is also made of steel, without a glass window. Chimney height 5 m.

Ermak 12

This stove was designed in 2012, made of 6mm steel. The device is equipped with a heater net for laying stones. The open type heater is constantly ventilated. Also included is a hanging water tank. The design of the model is laconic and modern, the door has a built-in viewing window. Chimney with central location. Ermak 12 is a good option for a Russian bath or Finnish sauna. The volume of the steam room is up to 14 cubic meters. Fuel - firewood.

Rus 18 LNZP pro

In the ranking of the best stoves for baths, last but not least is the stove model Rus 18 LNZP PROFI from the manufacturer Teplodar. The device easily heats medium-sized rooms with a volume of up to 12 cubic meters. The stones on the heater are laid out around the smoke collector, which allows the unit to evenly heat the steam room. The firebox material is alloy steel with the addition of chromium. The convector is made of stainless mirror steel. Firewood is used as fuel.

Tunguska XXL 2013 Inox

Among the best sauna stoves, the Tunguska thermofor stove is also worth mentioning. Satisfied buyers of the popular Tunguska model leave many positive reviews about it. The device is designed for intense heat supply, therefore it is made of high-quality heat-resistant steel. The model is most suitable for a Finnish sauna. The design is modern and attractive, equipped with decorative elements, the firebox door is equipped with a glass window. The model is heated with wood, peat pellets or pellets. The chimney is located offset. Manufacturers guarantee high reliability of the device due to the thoughtful design of the equipment, i.e. places more susceptible to heating are provided with a durable 3mm layer of heat-resistant steel. Chimney height 5 m.

Barbara mini

A very compact yet highly efficient oven. It will fit well into a small steam room up to 12 m, thanks to its size. Heated with wood, tank capacity 41 liters.

Empress Augusta STONE strong

The model operates in three modes: sauna, hammam and Russian bath. The device is equipped with a closed heater with decorative covers. The set includes a cast iron grate, a scoop, adjustable supports and other elements necessary for operation. The volume of the steam room should not exceed 22 cubic meters. Heated with wood.

Feringer classic

The following model is a good choice for a Russian bath. The stove is made in the original style with a firebox surrounded by stones. The device can be used in a steam room with a volume of up to 23 cubic meters, heating it with wood. The firebox is made of heat-resistant stainless steel. The door is equipped with a viewing window.

Vesuvius Scythian

This device is designed to operate in several modes: Russian bath, sauna, Turkish bath. Manufacturers have tried to implement all domestic standards for sauna stoves. The material of manufacture is structural steel, the door is made of cast iron. The volume of the room should not exceed 18 cubic meters.

VIRA COMFORT 18

One of the best sauna stoves is the VIRA KOMFORT 18 stove. This model combines high performance and attractive design. It is made of stainless heat-resistant steel. The type of heater is closed, the volume of the steam room is up to 18 cubic meters. The chimney design is shifted to the front of the device. The device provides comfortable, relaxing steam.

Termofor Geyser 2014

It is worth noting that the manufacturer Termofor is often found in the top of sauna stoves. The 2014 geyser model is suitable for both Russian baths and Finnish saunas. Let us present a more detailed description of the Carbon YES ZK terracotta model. The device is designed for steam rooms with a volume of up to 18 cubic meters. Like all previous versions of Thermofor stoves, this unit is heated with wood, peat briquettes or pellets. Structural steel was used in production. There are two types of heater - open and closed. The unit is made in the original brown color, which will give the bathhouse a special style.

Elbrus 26 with Panorama heat exchanger

Such a sauna stove can heat a steam room up to 24 cubic meters. The model has a convenient ash drawer and a panoramic door built into it. The case material is steel. Firewood is used as fuel. The heater is open. The stove is made in an unusual style; it looks like a metal basket filled with stones. This view creates coziness and evokes a feeling of being closer to primitiveness. Water tank volume 60 – 120 l.

Harvia Legend 240

This sauna stove can heat a steam room up to 24 cubic meters. The model has a convenient ash drawer and a panoramic door built into it. The case material is steel. Firewood is used as fuel. The heater is open. The design is made in an unusual style; it looks like a metal basket filled with stones. This view creates coziness and evokes a feeling of being closer to primitiveness. 830*600*600 115 70 200 390 From 29,000 rubles

Karelia-5 “Onezhskaya”

This stove has a high heat capacity and high efficiency, reaching 60%, is made of cast iron, and is heated with wood. The model includes a poker, an ash pan, lower and upper plugs, a casing and other elements. The volume of the steam room is up to 20 cubic meters. The capacity of the water tank is 75 l.

Termofor Kalina Carbon

The fourth model in the presented rating from the manufacturer Termofor is included in the premium class among this model range. She is very beautiful and elegant. It resembles a real fireplace, thanks to the large panoramic window in the door. It is better to use such a stove in the mode of a large Finnish sauna, with a volume of up to 30 cubic meters. Chimney height 5 m.

Troika No. 06M2

This stove must be additionally lined with bricks to ensure a comfortable climate in the steam room. Brick lining prevents the spread of infrared rays from the metal structure and significantly improves the heat capacity of the stove. The device is made of low-alloy steel and is capable of heating a small room with a volume of up to 16 cubic meters. The door is made of cast iron.

Hephaestus PB-03 M

The presented model is capable of heating a room up to 25 cubic meters in size. The furnace power is 12 kW. The body is made of cast iron. The front part of the stove is decorated with decorative paintings, which gives it a special charm.

EasySteam Yalta 15

The EasyStim Yalta 15 sauna stove is convenient and reliable in operation, and features economical wood consumption from 5 kg/h. Such a unit is recommended for heating a room with a volume not exceeding 10 cubic meters. The device is equipped with two types of heaters - internal and open.

EasySteam Sochi M2

The second stove in the EasySteam model range is equipped with an enlarged heater and heats a steam room with a volume of no more than 22 cubic meters. It is made of corrosion-resistant heat-resistant steel with a thickness of 4-6mm. The door is made of steel and decorated with an observation window.

Slavyanka Russian steam in soapstone

The unit has a strict design, but its appearance is softened by the built-in large panoramic window. This device is an ideal choice for a Russian bath; it can heat a steam room up to 18 cubic meters. The special appearance of the stove is given by the material used in the manufacture of the cladding - soapstone, thanks to which the stove looks like a noble marble monument.

EasySteam Gelendzhik

The next model from the manufacturer EasySteam is designed for lovers of a real Russian bath with a large steam room and soft steam. The device heats a room with a volume of up to 35 cubic meters. Externally, the device looks very modern, with a beautiful window.

Which sauna stove is better to buy?

Using the example of 10 stoves for a bath, we can summarize that the appropriate option when choosing is the one that quickly heats a large volume of the room. Safety is another important factor.

Many solutions require brick lining - and this is an expensive undertaking. Others are made of structural steel, a more economical material.

It is better when the firebox walls are made of steel and chrome. Such raw materials have increased resistance to corrosion and melting.

From the list we should highlight Tulinka NVU-150, Vesuvius Skif and Hephaestus PB-01. Models can heat air with a volume of 25 m3 and are suitable for both small and large baths.

They can withstand high thermal loads - up to 450˚C.
Easy to use, they quickly heat rooms in half an hour and retain heat for a long time. Advertising from sponsors: // // //

Conclusion

The rating describes in detail the best sauna stoves. The description of each model contains all the most important characteristics, covering the size, capacity and capabilities of each type. The buyer just has to evaluate his budget and choose the most suitable option for himself. Each model differs from the other in its design and performance.

Only a person who wants to purchase an exceptional item can choose the best one, because the devices are suitable for baths of different sizes. A truly proper metal stove is an excellent way to heat economically, allowing you to enjoy relaxing steam at any time.