Instructions for use of SUPI SAUNASUOJA (SUPI SAUNASUOYA) protective impregnation for wood in a bathhouse

General characteristics

Water-borne protective composition based on acrylate.

Protective antibacterial impregnation for wood in a water-based bath Tikkurila Supi Saunasuoja (Tikkurila Supi Saunasuoya)

Application area

Protective composition for surfaces in damp rooms, forming a dirt- and water-repellent surface. Contains anti-blue stain and anti-mold components. Used for coating wooden, wood fiber and concrete surfaces, according to the instructions for use. Do not use baths for treating shelves. It is used, in particular, for treating walls and ceilings in the steam room, washroom and dressing room of the bathhouse.

Drying time at +23ºС and relative humidity 50% – 30 minutes. The next layer can be applied after 2 - 3 hours. The surface is ready for use in about two days.

If necessary, the protective composition is tinted in one of the colors of the Tikkuril palette (pictured below).

The color catalog “Tintable varnishes for interiors” includes 30 glaze colors. The final color is influenced by the color and porosity of the wood itself, as well as the number of layers and gloss of the varnish. It is recommended to carry out a test painting

Prices are approximately like this:

• 2.7 l packaging - about $25;
• packaging 9 l — — about $74.

Required Tool

In order to efficiently process the internal surfaces of the sauna (lining), we will need a certain set of tools for painting work:

• Paint and varnish compositions for application to surfaces;
• Solvent;
• Personal protective equipment – ​​goggles, respirator, rubber gloves;
• Spray gun, roller, brush;
• Paint tray.

The selection of protective compounds is based on available means and personal preferences, but it must be said that you should not save on such materials, because they extend the life of the wood and protect it from an aggressive environment.

Imported impregnation Tikkuril

Application time

Work on applying impregnation is carried out in two approaches. The first is performed before installing the lining. It is very important to process not only the cladding, but also the sheathing on which it is attached.

The final stage occurs after finishing the walls. Experts recommend that if the bath is used at a high intensity, such work should be carried out at least twice a year.

Important. If you first properly treat the wooden surface with an antiseptic, you can save a lot on paint and varnish materials in the future.

Selection of compositions for processing

In order for the work done by yourself to be of high quality, you need to take a responsible approach to the choice of materials and understand them.

Today, the choice of such compositions in construction stores is quite large, and you can purchase both products from world-famous manufacturers, for example Tikkuril, and our domestic ones.

But not everything that is offered to us in the store is suitable, because the sauna has increased temperature and humidity.

Therefore, to select, you need special knowledge about each of the protective compounds; let’s look at each in more detail:

• Drying oil. It can be used for both external and internal work, but, unfortunately, it almost does not protect the wood from the effects of water vapor;
• Acrylic lacquer. Helps maintain natural color and protects the material from ultraviolet exposure. However, when such a composition is exposed to high temperature, it emits an unpleasant odor;
• Varnish with solvent. This is a pretty good antiseptic, the price of which is low. Unfortunately, due to the fact that when heated, such varnish releases toxins and has a pungent odor, it cannot be used inside saunas;
• Special impregnation. These materials are created specifically for baths; they are not afraid of high temperatures and humidity, and do not emit unpleasant odors and toxins. When working with them, you don’t need any special skills or knowledge, so you can even apply them yourself.

As you can see, the list of compositions is large, but not every one of this list can be used for interior work in a sauna.

Domestic varnish for saunas “Aqua”

We carry out surface treatment

In order to complete this work, you will need instructions that will help you better navigate during its implementation:

• First you need to clean the surface from dust. To do this easily and quickly, take warm water and add soda to it. The approximate proportion is 300 grams of soda per 10 liters of water;
• Next, degrease the surface;
• To get a smooth surface, it is better to sand the lining itself; this work can be done using pumice;
• Then we apply an antiseptic agent to the surface of the lining that protects against fungus;
• Now you can proceed directly to the impregnation stage;
• After the impregnation has dried, special paint should be applied over it.

Advice. If you apply paint with a brush, then the last layer must be applied with movements that are parallel to the direction of the fibers on the material. In this case, the brush mark from application will be invisible.

Instructions for use

Conditions for painting

The surface to be painted must be dry. The air temperature should be above +5ºС, and the relative humidity less than 80%.

Preliminary preparation

Clean the surface from dirt and dust. If necessary, sand rough wooden surfaces before coating. Remove sanding dust.

Treatment

Mix the composition thoroughly before use, as well as during work, in order to ensure uniform mixing of the pigment concentrate and the matting component in it. If necessary, dilute with water. Apply the composition in 2 layers in the direction of the wood grain, and in steam rooms only in one layer.

When applying a tinted composition to check the shade, it is recommended to do a test coloring on a separate board. The final color of the coating depends on the nature, hardness and original color of the wood, as well as the number of layers. To avoid differences in shade, the entire surface should always be treated continuously, and when processing large panel surfaces, several boards at a time.

Cleaning Tools

Wash working tools with water or Pensselipesa detergent.

Care

Not earlier than a month after treatment. Clean the surface with Soupi Saunapesu (0.1-0.5 liters of product per 5 liters of water). To remove lime salts, use a 10-15% solution. To remove thick layers of lime salts and rust, use undiluted Soupi Saunapes. To whiten shelves, use “Soupi Saunapes” diluted in water (1 part product - 1 part water). Let it act for 15 minutes. and rinse with clean water.

Protective composition Tikkurila Supi Saunasuoja 2.7 l

Delivery conditions can be selected when ordering through our online resource. Delivery is carried out throughout Moscow, the Moscow region, as well as to regions of Russia.

Important !!! — delivery in Moscow and the Moscow region is carried out only to the gate or entrance. The forwarding driver is not involved in unloading!

Please ensure that large and heavy cargo is unloaded in advance!

Delivery within Russia is carried out through any transport company selected and agreed upon with the Customer according to its tariffs and conditions. Valid only for clients in Moscow and the Moscow region. DELIVERY TIME in the product card is indicated for the regions of Moscow and the Moscow region, subject to the availability of the ordered product in the store’s warehouse.

Delivery times to other regions are determined by the relevant transport companies providing delivery as they complete and dispatch the transport or in accordance with schedules.

The approximate delivery times of cargo by transport companies from terminals in Moscow to some cities are as follows: to Armavir 4 days, Arkhangelsk 3 days, Astrakhan 3 days, Barnaul 7 days, Belgorod 2 days, Bratsk 9 days, Vladivostok 11 days, Volgograd 2 days, Voronezh 1 day, Ekaterinburg 4 days, Irkutsk 7 days, Kazan 2 days, Kaliningrad 7 days, Krasnodar 3 days, Krasnoyarsk 8 days, Lipetsk 1 day, Murmansk 4 days, Nizhny Tagil 4 days, Novosibirsk 6 days, Omsk 5 days, Orenburg 4 days , Rostov-on-Don 2 days, Samara 3 days, Saratov 2 days, Sochi 4 days, Surgut 7 days, Tomsk 7 days, Tyumen 5 days, Khabarovsk 10 days.

Important !!! — a list of transport companies with which our store primarily works is given below. At the same time, we are ready to consider sending cargo through any transport company at your request.

If delivery is not required, the ordered goods can be picked up at the “PICKUP POINT”.

Transport companies through which delivery is mainly carried out:

1. Baikal-Service (delivery calculator). DELIVERY TO THE TERMINAL IN MOSCOW IS FREE.

2. Business lines (shipping calculator). DELIVERY TO THE TERMINAL IN MOSCOW IS FREE.

3. First Forwarding Company (PEC) (delivery calculator). DELIVERY TO THE TERMINAL IN MOSCOW IS FREE.

4. Steil (delivery calculator).

5. GLAVDOSTAVKA (delivery calculator). DELIVERY TO THE TERMINAL IN MOSCOW IS FREE.

6. GTD (KIT) (delivery calculator). DELIVERY TO THE TERMINAL IN MOSCOW IS FREE.

7. Express Auto (delivery calculator). DELIVERY TO THE TERMINAL IN MOSCOW IS FREE.

8. Vozovoz (delivery calculator).

9. Zheldorekspedition (delivery calculator). DELIVERY TO THE TERMINAL IN MOSCOW IS FREE.

10. Energy (delivery calculator). DELIVERY TO THE TERMINAL IN MOSCOW IS FREE.

11. SDEK (delivery calculator). DELIVERY TO THE TERMINAL IN ODINTSOVO IS FREE.

The goods are shipped to the transport company's terminal after advance payment of the purchase price by the Customer. Shipping costs are usually paid directly to the carrier upon delivery of the order to the destination (transport company terminal) specified by the Customer. Please note that the results of calculators on the websites of transport companies are preliminary. The final delivery cost is determined only after delivery of the goods and may be either more or less than the estimated cost. Orders shipped through transport companies are necessarily bound, which eliminates as much as possible any damage to the goods. After delivery of the cargo, the waybill is necessarily copied and sent to the email address specified by the client during registration.

When calculating delivery costs, the boundaries of Moscow AO are determined by the circumference of the Moscow Ring Road.

Antiseptic for bath Senezh

Senezh sauna antiseptic is a worthy competitor to Finnish Tikkurile. Here are its characteristics.

• This is a water-soluble acrylate-based type. Available only in colorless type. The liquid penetrates deeply into the wood, leaving a durable film on the surface.
• It is not only an antiseptic (against microorganisms and small bugs), but also an excellent antibacterial agent.
• Can be used to treat walls, ceilings, floors and furniture, except shelves. Experts recommend that the most abraded places in the bathhouse (floor and railings) be treated with varnish after applying an antiseptic.
• You can apply the antiseptic solution to both dry and wet surfaces. For this, a regular brush is usually used. It is recommended to apply the composition in two layers in the steam room, in the locker room and washing room - in three. Each layer dries within an hour. I would like to add that Senezh antiseptic can be applied to pre-painted surfaces.
• Material consumption is one kilogram per 7-15 m². This large variation depends on the number of layers applied.
• Senezh antiseptic should be stored in the same way as Tikkuril, at above-zero temperatures.

Reviews for both materials from both specialists and consumers are only positive. The main thing is to correctly perform all actions in the process of applying them to wooden structures.

Sheathing care

• The most important component of care is timely ventilation;
• You can wash such a surface with a damp cloth, but without using household chemicals;
• If severe contamination occurs, it should be removed only after the boards have completely dried. In this case, we clean the surface with sandpaper;
• In household chemical stores you can purchase special sauna care products that remove dirt without damaging the surface.

Photo of the treated steam room

Basic recommendations from experts

• Before application, the paint must be thoroughly mixed, this will promote uniform drying and color of the surface;
• Before you start applying, it is best to make sure that you have chosen the right color and the desired thickness. To do this, we do a test opening from the edge;
• To achieve the best painting effect, you need to apply the coloring composition in a thin layer;
• It is better to paint metal elements with a special sponge;
• The primer is tinted to match the color of the coating itself;
• Work cannot be performed in hot weather.

Important. When painting with your own hands, you need to pay special attention to the ends of the lining, because these are its most vulnerable places.

Selection rules

When choosing an antiseptic for wood treatment, it is necessary to take into account a fairly large list of criteria.

• Cost of antiseptic. It is not recommended to buy a cheap one, because the protective material must perform several tasks at once, and a good, expensive option can do this.
• Where are protective measures carried out? That is, outside or inside the bathhouse. Therefore, carefully study what is written on the label.
• Compound. The best option is if it is a combined option, because it can be used to both protect against pests and increase the fire-retardant properties of wood.
• Manufacturer. Let's face it, it's an important factor. As always, it is better to give your preference to well-known brands. For example, the Finnish manufacturer of paints and varnishes Tikkurila or the domestic brand Senezh or Neomid.
• Safety. Everything is clear here. Many experts recommend using water-based antiseptics for internal treatment of baths. When purchasing, be sure to ask for a quality certificate and a Sanitary and Epidemiological Expertise conclusion.

When deciding which antiseptic to choose for a bath, you need to take into account the amount of material used. This depends on the absorption of the material into the wood. The thing is that the antiseptic solution itself can be absorbed in small quantities, or the consumption may increase to the maximum. This primarily depends on the wood being processed. Eg:

• Pine easily absorbs antiseptic, so its processing will require more protective material.
• Linden, cedar, alder, aspen - have an average absorbency value.
• Oak, larch, birch, fir, ash have a high density, so the antiseptic is absorbed into them with great difficulty.

So, taking into account all the above criteria, you can make the right choice of antiseptic for the bath. Now let's look at the main manufacturers.