Rating of cast iron stoves for baths, the best models: “Vesuvius”, “Hephaestus”, “Magnum”, “Svarozhich”, “Sudarushka”, reviews, which is better according to users, review

To create the atmosphere of a Russian steam room, a stove of a special design is required: the stones must not only be heated, but heated. Only then will it be possible to get light steam. The second task is to make sure that while the stones are heating up, the air does not overheat. After all, for a Russian steam room the temperatures should be low: 50-75°C (but the humidity is 50-60%).

To do this, it is necessary to somehow neutralize the high heat transfer of the metal. This is best realized in brick kilns. In them, heat is accumulated in the mass of the brick. That's where the idea came from - to line metal stoves with bricks. It absorbs most of the radiation from the body. After it warms up, it begins to radiate heat, but this time it is soft and pleasant for us. It turns out to be something like a brick oven, which, with the right approach, allows you to get a bathhouse very similar to a Russian one.

By covering a cast iron stove with a brick screen, we get soft heat, like from a stone stove

But not everyone wants to put down the screen. And there is another method to reduce heat radiation - cladding with slabs of “bath” stones. These stones are soapstone and serpentine, marble and some others. They have a very high heat capacity, so they also absorb radiation quite well. At the same time, they are also beautiful. But roads.

Bath stoves "Vesuvius": review of models and advantages

The quality of Vesuvius stoves is in no way inferior to their foreign counterparts, but Russian models are also aimed at buyers with modest incomes - the stoves have a very affordable price. This is the first advantage of domestic products.

Stoves for baths "Vesuvius"

We’ll talk about other positive aspects of domestic models of stoves for saunas and Vesuvius baths below:

1. High quality products - Vesuvius stoves are made using innovative technologies and modern safe materials. If operating standards are observed, the oven can operate for a long time without breakdowns or accidents.
2. Stylish design – sauna stoves fit into the interior design of any modern bathhouse.
3. Reliability and safety - manufacturers guarantee long-term operation of the furnaces even in intensive use.
4. Ergonomics - stove models when operating in difficult conditions are characterized by low energy consumption.

A distinctive feature of Vesuvius stoves is the protective coating of the firebox walls with a special silicon-organic composition, so the stove is able to withstand significant temperature changes under operating conditions with high humidity, even if the changes are repeated many times during the day.

Heating of the bathhouse occurs due to the combustion of solid fuel (wood), a high-quality firebox ensures even distribution of heat throughout the entire bathhouse. The design of Vesuvius stoves provides a volumetric container filled with stones that can withstand temperatures up to 400 C.

The range of Vesuvius stoves is wide; manufacturers have developed dozens of models of wood-burning stoves for the most demanding customers. Here are some of them:

• Vesuvius Rusich stoves are suitable for installation in a bathhouse or sauna; they can compete in quality with foreign analogues of wood-burning stoves. In total, the brand includes five unique models that will ensure the most optimal balance of humidity, temperature and steam in the steam room. A volumetric heater is capable of creating thick and light healing steam, which has a beneficial effect on the human body, curing a number of diseases.
• Wood-burning stoves Vesuvius Legend - most of the models of this brand, in addition to high technical and economic indicators, have an amazing design - enclosing figured forged gratings.

Furnaces Vesuvius Rusich

conclusions

The level of tilt of the body does not affect the operation of the stove. Therefore, you can install it arbitrarily. It is possible to treat the chimney with a high-temperature compound. This will help eliminate the metallic smell. After several fires, the pipe burns out and turns red. No further oxidation of the metal occurs.

As you can see, you can build a horizontal stove for a bathhouse yourself, if you get acquainted with the main stages of work and the features of preparation

It is important to choose the right materials and find all the necessary tools. If you have basic welding skills, you can make an effective structure that will last for decades

“Vesuvius Russian Steam” - a stove for a Russian steam room

A reliable mesh heater is constructed around the stove. In addition to the reinforced external mesh, a special closed-type heater is provided in the upper part of the firebox. The designers have provided easy access when loading through a cast-iron door at the end (back) of the firebox. The parameters of dryness and lightness of steam are achieved by heating the stones selected for the closed heater - 400 °C.

Water is supplied through the cast-iron door into the closed heater - the required steam concentration is achieved. Experts in the Russian steam room claim that the true indicators of real steam are created when the temperature rises to 500 °C.

Reviews

Consumers who have installed Slavyanka stoves from , in their reviews, talk about the rapid heating of a steam room of 15 cubic meters at an ambient temperature of +6 degrees. When the top of the screen is open, the room is too hot. A comfortable 60 degrees is achieved with half covered or stones placed. The only drawback noted in the reviews is that the door does not fit tightly, which maintains traction even when the dampers are closed. It is impossible to eliminate this nuance by adjusting the damper on the chimney, since the smoke penetrates into the room.

Care

In order for a cast-iron stove to properly serve its intended life, it does not require special care - it is enough to use it in the permitted operating mode.

Cast iron heaters are quite unpretentious; they are not afraid of high humidity and temperature fluctuations, but it is also undesirable to overload them. No stove will last as long as promised if you heat it for days on end and heat rooms whose cubic capacity exceeds its upper limit.

Reliable, versatile, efficient - cast iron stoves can be an excellent option for your bathhouse, the main thing is to choose a decent manufacturer and model according to your needs.

FAQ

Which stoves are better - steel or cast iron? Cast iron ones give off heat better and last longer, and in the baths with them there is “light steam”. But they also cost more.

Is there a difference between stoves for baths and saunas? Electric saunas are usually used because they do not require steam.

Why is a sauna stove not suitable for heating a living space? It is designed to heat up quickly and cools down relatively quickly - you will have to use more fuel to maintain heat.

What is better: making a stove yourself or buying it? Depends on whether you know how to make them, or whether you have the opportunity to turn to trusted craftsmen, as well as the funds for this (most likely, it will cost more than buying a ready-made one). If yes, then it is quite possible to make your own stove.

Hurricane series stoves for Russian baths.

The Hurricane series stoves are ordinary legends, on which they put a metal box, attached a door and made the mesh higher. This is where the difference from the Legend ends.

The series appeared due to the increased popularity of closed heaters. But the company did not bother designing a new stove, but decided to slightly modernize the proven line. Did they achieve what they wanted? Yes. Most dealers of this stove position it as an ideal option for a Russian bath, although it is not. For a classic Russian steam bath, the heating element must be insulated, that is, the firebox must be surrounded by stones and covered with at least a metal sheet. Thanks to this insulation, the stone in the heater reaches maximum temperatures, and the steam room will never dry out.

What happens in reality? It is most suitable for Russian high-temperature, but not for steam. The walls of the firebox are open, which means that all the heat emanating from the firebox will flow into the room. And the box on the same 16 holds only 30 kilograms. The pipe passing through the box eats up useful space in a small heater. Yes, I agree that the stone heats up well in this heater, But! there is not enough of it.

The heater itself is not conveniently designed. It’s trivial that you won’t open it without gloves. In the Russian steam (a metal stove, which we’ll talk about later), we used a ladle to open the door, but in the Hurricane it is placed at an angle, and such a life hack will not work.

The lineup

produces two lines of cast iron sauna stoves of the same name: for steam rooms with a volume of 8-18 cubic meters - “Slavyanka”, for sauna structures with a volume of 15-35 cubic meters - “Firebird”. Each series is offered in four versions:

1. Economy Only the central part of the stove - the firebox - is supplied. This option is ideal for those who prefer to lay out the structure themselves from brick or other materials.
2. Standard. The firebox, made of cast iron, is covered with a stainless steel casing. An option for sauna lovers, since the steam room is heated by infrared radiation from the metal.
3. Classic. For lining the cast iron firebox, natural stone 40 millimeters thick is used - coil, soapstone, or a combination of both. Infrared radiation is shielded by the cladding, which is pleasant both visually and tactilely. A model for those who prefer a dry air bath.
4. Luxury The internal part of the structure, consisting of cast iron, is lined with natural stone - coil, soapstone or a combination of both - 40 or 50 millimeters thick. Unlike the standard version, in the luxury version of the stoves (“Svarozhich”) the firebox is completely lined with natural material, forming a closed heater. Model for creating a classic Russian bathhouse.

Heating appliances and stoves

1. Vesuvius Triumph 180 S.

Wood-burning cast iron stoves are quite efficient. They can help out in winter, when the power goes out and there is no gas in the house. At the same time, Triumph models look aesthetically pleasing, so they can be placed in the middle of a large room and watch the fire through the transparent door. On top there is a “burner” for cooking or heating food - a useful addition for a country house.

Triumph-180 has ribbed side walls that accumulate heat well and are able to release it to the air in the room for a long time due to the increased surface area. The total power of the device is 7 kW, which allows you to heat a room up to 70 m2. But it is necessary to take safety precautions when installing the stove, since it is simply a large firebox heated to high temperatures.

2. Garden wood stoves Vesuvius Bumblebee 270.

In fact, these are ordinary potbelly stoves, which the manufacturer has refined inside and out. As a result, rustic stoves have turned into universal equipment where you can cook delicious dishes over the fire. The kit already includes a tall chimney, the design also includes a drawer for the ash pan, and the grates are traditionally cast from cast iron. Externally, wood stoves have also changed noticeably. The Bumblebee model now has side “wings”-stands, forged legs with an additional shelf, loops for hanging utensils and a large nest with a cauldron lid.

Vesuvius steel potbelly stoves are demanding in terms of operating conditions. To prevent the metal from being destroyed by external factors, to be easily cleaned of soot and to look aesthetically pleasing, it is coated with silicone enamel. The required strength is gained only after the first heating, so at this stage it is better to raise the temperature gradually. At the same time, the solvent is burned out of the paint, so a chemical smell may appear.

Line of sauna stoves

The family of the line is quite large. One of them is “Vesuvius Vertical”, a heater with an unusual appearance. Each modification has standard dimensions: height 1 m 1 cm, width – 54 cm, and depth – 79 cm. It is noteworthy that these models differ in the combustion tunnel doors. They can be very different:

• with glass: regular or panoramic;
• without glass.

The purpose of the line is to heat steam rooms in baths with a volume of 8 to 18 m3. They do their job perfectly and will last for many years. The photo below shows what the Vesuvius vertical oven looks like with a transparent door.

The line of units “Vesuvius Skif” and “Russian Steam” are wood-burning stoves with an open heater. The assortment is more than large, you will have plenty to choose from: different sizes, types of doors and shapes. Since there are really a lot of products, you can easily choose the best option for your case and goals. “Russian Steam” has only 6 different modifications, which are designed for heating rooms with a volume of 18 to 28 m3.

Note! One of the modifications of the “Russian Steam” has an external lining made of a coil. But there are plenty of Vesuvius Scythian models - 26 options! These include different sizes, shapes, glass or iron doors. In general, everyone will be able to choose an option for themselves, suitable for any room with a different area

Below is shown the “Vesuvius Skif” stove modification SCh12 with an iron door

In general, everyone will be able to choose an option for themselves, suitable for any room with a different area. Below is shown the “Vesuvius Skif” stove modification SCh12 with an iron door

But there are plenty of Vesuvius Scythian models - 26 options! These include different sizes, shapes, glass or iron doors. In general, everyone will be able to choose an option for themselves, suitable for any room with a different area. Below is shown the Vesuvius Skif stove, modification SCh12, with an iron door.

Accent! There are models of Elite stoves that are lined with a coil, have a combustion tunnel and a glass door. There are not many of them, however, the units look original and interesting.

The Vesuvius Lava line model with a closed heater is very popular. A distinctive feature of the stoves are the forged elements used as decoration. They are located on top, bottom and in the middle of the body. There are also a lot of variations, about 24. They have different power, dimensions and appearance. From these, you can choose a stove capable of heating steam rooms with an area from 6 m3 to 26 m3. You can choose with a combustion tunnel or without.

In addition, there are several more lines - the Vesuvius Rusich and Legend stoves. They are not decorated with forging on the body, but this does not interfere with high-quality work. These stoves are made of cast iron, so they are heavy. For example, ordinary stoves weigh 60 or 100 kg, but these ones weigh 160 kg. The size of the heated area is 10–28 m3.

What does all this give you? It is known that with a large assortment of goods, it is much easier to choose. Such a number of units for heating a bath will allow you to choose the appropriate option. This applies to the purpose, area of ​​the steam room, price, dimensions and appearance. Having made your choice, you can begin installing the equipment.

Type selection

Each owner chooses a stove with a heater that he likes. It’s good if you have experience in steam rooms, each of which is equipped with its own type of container for stones. And yet there are recommendations.

It is better to use an open heater in small baths with metal stoves, in which they do not steam a lot and for a long time. Quick kindling is convenient. Well, adding water to stones is a special process.

A closed heater is required for baths with brick stoves. Steel ones must be equipped with a forced supply of steam, which will pass through the stones. If you set aside a whole day for a bath, then a closed heater is what you need.

The choice of type of placement of stones for the stove depends on the preferences of the owner. For small baths, we can recommend an open heater to quickly get the steam room ready. In large complexes for long-term holidays, they install a closed one to retain heat longer.

TOP 8 best wood-burning stoves for baths and saunas

Hephaestus PB-04 MS

It is an excellent option for heating a small bathhouse with a volume of up to 15 m3. Each element of this furnace is solid, which increases the level of reliability and service life.

The model is equipped with a door with glass inserts that allows you to observe the burning of the flame in the firebox and a mesh basket for an open heater.

The walls of the furnace are made of high-quality cast iron, with a thickness of 1 to 6 centimeters, which prevents burnout and corrosion.

The surface can heat up to high temperatures, contributing to the formation of useful fine steam in the room.

• power - 12 kW;
• weight - 165 kg;
• dimensions - 38*42*51.8 cm.

Advantages:

• heats up quickly,
• nice design with panoramic door,
• durability.

Minuses:

• complex assembly
• unpleasant smell when first lighting.

Hephaestus PB-04

The unique design of the stove allows it to be considered one of the most reliable among its kind. The heater is made in the shape of a trapezoid. The use of unusual geometry allows you to quickly reach the desired temperature regime, warming the room and turning water into steam.

The length of the firebox tunnel can be adjusted based on need. The glass used for finishing doors is characterized by increased heat resistance.

A steel ash box is included with the stove.

The service life of the model is from 30 years and above.

• power - 8 kW;
• weight - 151 kg;
• dimensions - 38*42*51.8 cm.

Advantages:

• can be heated remotely,
• modest dimensions.

Flaws:

long installation

Hephaestus PB-03 M

The alloy cast iron sauna stove has a unique design with two fireboxes, as well as a pyrolysis gas combustion system.

The material does not corrode and does not change shape under high temperatures. The air in the room where the stove is installed does not lose oxygen. The heat remains for several hours after the end of combustion.

The package includes a stainless steel ash box, as well as panoramic heat-resistant glass made in Germany.

• power - 18 kW;
• weight - 190 kg;
• dimensions - 59*41.8*75 cm.

Advantages:

• high quality metal,
• rapid heating of the room,
• design.

Flaws:

takes up a lot of space.

Hephaestus PB-02

A combustion unit with two chambers and enhanced convection allows you to quickly warm up the steam room and maintain the temperature level for a long time.

Heating temperature - up to 750 degrees.

It is possible to move the stove portal into a room adjacent to the steam room for safe combustion.

Requires brick lining.

The door is decorated with elements of artistic casting.

• power - 25 kW;
• weight - 300 kg;
• dimensions - 64.5*45.8*85.5 cm.

Advantages:

• possibility of remote combustion,
• Keeps warm for a long time.

Flaws:

• needs to be lined
• requires the construction of a solid foundation.

Hephaestus PB-03 MS

The stove is equipped with a three-section closed heater, and specially shaped ribs inside the firebox, which promote rapid heating and the formation of useful steam of fine fractions.

The firebox is organized in such a way as to achieve the maximum level of efficiency.

The walls are able to withstand a significant weight of stones.

The door is made of cast iron and decorated with glass.

• power - 12 kW;
• weight - 210 kg;
• dimensions - 50*70*85.5 cm.

Advantages:

• very powerful
• Heats up quickly and doesn't cool down for a long time.

Flaws:

It's better to put it on top of the foundation.

Vesuvius LEGEND STANDARD 16 (DT-4S)

The wood-burning cast iron stove is equipped with a sealed firebox made of three elements with bolted connections. Can heat a steam room with a volume from 8 to 18 m2.

The oven door is not airtight and is decorated with heat-resistant glass.

External heater, built-in chimney.

• power - 16 kW;
• weight - 116 kg;
• dimensions - 56*70*69 cm.

Advantages:

• affordable price,
• nice design.

Flaws:

leaky.

Vesuvius LEGEND FORGING 16 (270)

The stove of this model is suitable for organizing heating of a steam room from an adjacent, adjacent room. It has a three-section firebox with high efficiency and fast heating.

The volume of the steam room can be up to 20m3.

The model has a classic appearance and bronze color.

• power - 16 kW;
• weight - 96.5 kg;
• dimensions - 70*56*62 cm.

Advantages:

• weighs little
• you can heat from the utility room,
• stylish look.

Flaws:

low quality metal.

Vesuvius HURRICANE STANDARD 16 (DT-4)

The sauna stove is made of high-quality cast iron and equipped with a spacious open-closed steel heater that helps produce abundant steam.

The type of fuel channel is remote, closed with a solid cast-iron door.

• power - 16 kW;
• weight - 110 kg;
• dimensions - 80*55*88 cm.

Advantages:

heats up quickly

Flaws:

You need to constantly add firewood, otherwise the temperature in the steam room drops.

Wood burning

Main characteristics of Legend series furnaces.

Oven legend 22 cross-section

The Legend series sauna stoves are divided into four groups by volume:

1. Legend 12 - from 6 to 14 m3
2. Legend 16 - from 8 to 18 m3
3. Legend 22 - from 12 to 24 m3
4. Legend 28 - from 14 to 30 m3

All groups differ only in the dimensions of the furnaces. Not by a smoke damper system or any other design changes, but simply by size. The stove is created according to the complete classics. Three parts of the furnace are screwed together. Between the parts there is a ceramic cord and a heat-resistant sealant.

The oxygen supply system is regulated by the ash pan and, in some cases, by doors. Let’s say that on doors numbered 205 and 224 there are blower dampers, thanks to which a pseudo-system of clean glass and regulation of the oxygen supply are carried out.

Legend series standard

There is also a grid distinction. In the “legend forging” series, the series is made with forging elements, and also contains the most interesting doors. And in the cheaper series (standard) the doors are ordinary. So the company differentiated essentially the same stoves, without any special changes, into premium and economy.

Is this fair? I think no. In fact, if you want a large glass or a hermetically sealed door, you are required to overpay for a forged mesh painted with bronze paint.

As I wrote earlier, the smoke tooth system in “legend” sauna stoves is primitive. In fact, this is an ordinary curved plate, thanks to which unexhausted gases are slightly retained in the chamber before leaving the furnace. Simply put, we are not talking about the complex system that is installed on Feringer furnaces or the rather good systems of the Teplodar company. But the indisputable advantage of the simplicity of such a tooth is cleaning the chimney. You move this tooth to the side, or remove it altogether, and get direct access to the chimney.

With your own hands

Combination - an iron stove and a brick pipe that accumulates heat, laid out with your own hands by a non-professional

Here we will not go into the details of making sauna stoves yourself. However, it is worth noting that it is quite difficult to build such a stove yourself out of brick, or rather, it is difficult to do it correctly.

In fact, would the work of a professional stove maker be so highly valued if anyone could install a brick stove using online schemes? Every craft has its secrets.

We admit that a person with many years of experience in bricklaying can try his luck with his own stove. Beginners should practice on something simpler.

By the way, brick for this purpose cannot be silicate or hollow. This is necessarily a fire-resistant solid ceramic brick, in particular fireclay, which is used inside the furnace. The mortar used for masonry does not contain cement, it is a mixture of clay and sand.

It is easier to weld a metal stove than to install a brick one yourself. Think carefully about what protection you will have from its excessive heat.

And do not forget that it is better to make a heater not just closed, but with direct fire. Of course, this will force you to change stones much more often than if they were in a solid metal box, but tradition has not only advantages.

How to light a stove?

For complete kindling you need a “seed”. The stove is heated with the help of 4 narrow small logs, shavings/chips and paper (preferably newspaper - it flares up better). Kindling algorithm:

• Place a couple of logs parallel to each other on the grate; the distance between them is 10-15 cm;
• place crumpled paper between the firewood and sprinkle it with shavings or wood chips;
• Place two more logs diagonally on the bottom logs;
• Set the paper on fire on one or more sides.

It is not always possible to light wood the first time. This requires a certain skill. Liquid fuel must not be used as an aid. In extreme cases, dry alcohol can be used. But if the firewood is dry, then problems with kindling are minimal.

As soon as the flame flares up, you need to close the firebox door and then partially close the ash damper. After this, you can be guided by the sound - if there is a characteristic hum from the firebox, everything has been done correctly. If the sound is weak or absent, you will have to melt it again.

This is just the beginning - a wood stove needs regular refilling of logs. This also needs to be done wisely.

We suggest you familiarize yourself with: Chimney size for a brick stove

Steam gun

The operation of a closed heater depends on how isolated it is from the walls of the unit and the state of the air in the steam room.
The better these indicators are, the hotter the stones will be able to heat up. However, in this case there is a problem with how to supply water to the stones. In order to obtain steam inside the heater, a system of tubes with holes is installed. A glass or funnel is attached to the outside and water is poured in. It flows down the tube down the unit. Such a device is called a heat gun. It got its name because the escaping steam makes loud sounds, reminiscent of a gunshot.

Typhoon Series

Under this name, 9 units are produced, adapted for heating rooms from 6 to 30 m3. The design of the Typhoon's fuel chamber and gas duct system does not shine with originality and almost completely replicates the Skif model. The difference lies in the shape of the heater, which has turned from cylindrical to rectangular. The heater is ventilated and also open on all sides.

The manufacturer declares that some elements of the stove that are most exposed to fire are made of 12 mm thick carbon structural steel. True, he does not indicate what these elements are. Otherwise, the metal remained the same - 4 mm on the side walls, 8 mm on the back and top. All stoves have a firebox with an external channel. The extension size is standard, 25 cm.

If we talk about options, the Vesuvius “Typhoon” stove boasts 2 types of viewing glasses:

• heat-resistant, built into a standard fuel door.
• panoramic, with dimensions 41 x 41 cm.

In modifications with sight glasses, it is possible to regulate the air supply to the firebox using a special damper. There is also an option to install a hanging tank for heating water.

Advantages

The safe operation of furnaces is achieved by reliable bolted or welded connections of elements and assemblies. The technological joints of the fireboxes are sealed with a ceramic seam (the products can withstand temperatures of 1200 °C without breaking the seal). Universal stove options are recommended for use in Russian or Finnish baths. The main advantages of Vesuvius stoves are described:

• ergonomic design;
• stylish design;
• increased efficiency - efficiency factor;
• specialized self-cleaning system;
• durable heat-resistant glass on the doors;
• increased fire safety.

The manufacturer launched 8 bath models on the market:

• "Rusich";
• "Scythian";
• "Vertical";
• "Lava";
• "Optimum";
• "Premium";
• "Russian steam";
• "Legend".

Cast iron stoves

Wood-burning cast iron stove Vesuvius “Hurricane”

An inexpensive, high-quality cast iron stove “Vesuvius” Hurricane will make your stay in the bathhouse truly pleasant and unforgettable. With its help you can easily get wet steam from a Russian bath or dry steam for Finnish sauna lovers. A cast iron convection oven is designed for installation in a steam room with a combustion tunnel exiting to the adjacent room.

The special 12-mm cast iron alloy from which the Hurricane firebox is made can withstand even very high temperatures. Stones heated in a closed firebox also reach incredible temperatures, allowing you to get a special fine vapor during the vaping process.

The Vesuvius Hurricane cast iron stove can be used in steam rooms with a volume of 8 to 30 cubic meters. The warranty on the stove is 30 years. Depending on your preferences, you can choose a Vesuvius Hurricane cast iron stove with a solid sealed cast iron door without glass or with heat-resistant fireplace glass.

Cast iron stove Vesuvius “Legend”

Wood-burning cast iron stove Vesuvius with an efficiency of about 80%, quickly heats up the steam room, is resistant to high temperatures, maintaining its marketable appearance for many years. The mesh across the entire width of the firebox holds 160 kg of stones + the impressive weight of the stove itself (160 kg) helps preserve heat for a long time in a room from 10 to 28 cubic meters. When planning the installation of a Vesuvius Legend wood-burning stove, you should take care of a solid foundation or strengthen the logs in the place where you want to install it.

A sauna in the midst of the noisy life of a metropolis is not a luxury, but simply a necessity! A person should relax and rest from time to time. Vesuvius stoves will help you accomplish this task, giving you gentle steam and especially soft, comfortable warmth for your body, in the literal sense of the word “bath.”

Video review of Vesuvius wood stoves

“Stove Vesuvius Skif 12, bought 4 years ago. It hasn't let me down yet, it works properly. The stove heats up quickly and evenly, creating a quite decent sauna atmosphere. The price-quality ratio suits me quite well. I don’t see the point in purchasing more expensive models; if you have a small steam room, this stove will be enough.”

“Vesuvius Rusich stove. Fast heating of the sauna, robust body. In principle, all the functionality declared by the manufacturer justified itself. But my opinion is that without additional lining of the stove with bricks, all your efforts will literally go down the drain. Or increase the volume of stones and put them in the oven itself, so that the heating process goes more or less quickly and without hassle.”

“Vesuvius Furnace Legend forging 16 (270). We replaced our old Termofor. A cast iron stove was chosen so that the stove would not burn out. I've been happy with the stove for several years now, the steam is very soft, the heat in the sauna is stored for a long time and the water in the tank is still hot the next day. The glass, however, did not want to clean itself, so it had to be cleaned. Maybe we are doing something wrong - I can’t say for sure. Otherwise we are satisfied. I hope the stove will serve us for another ten years.”

“Stove-fireplace Skif 22 with panoramic glass. The quality of the oven is excellent. The price is not the lowest, but the stove is worth it. In terms of reliability, I don’t see any equal. Moreover, it is subjected to almost daily use. I don’t believe the negative reviews, because... I myself am the owner of this unit. I recommend!"

What should the power be?

If the power is too high, it will lead to too much heating of the air and not enough heating of the stones. Using an insufficiently efficient stove will lead to the need to heat the steam room for a long time.

Before purchasing, you need to calculate the required power for the bath. For this purpose, you can use the following technique.

The initial value for calculation is the volume of the steam room.

To obtain it, you need to measure the length, width and height of the room. For example, if a room is 3 m long, 2 m wide and 2.2 m high, then to calculate the volume, you need to multiply these three numbers. It is equal to 3 * 2 * 2.2 = 13.2 cubic meters. m.

When choosing, the power should be sufficient to warm the room. Source stroyka.ru

You need to take into account how much heat will escape through the windows and doors.

To do this, you need to calculate their area and multiply by 1.2.

For example, if the height of the door is 2 m, the width is 0.9 m, then the area will be: 2 * 0.9 = 1.8 square meters. m.

If the window is 0.5 m wide and 0.8 m high, then its area will be 0.5 * 0.8 = 0.4 sq. m.

The correction value for the volume of the room will be (1.8 + 0.4) * 1.2 = 2.2 * 1.2 = 2.64 cubic meters. m.

This figure must be added to the previously calculated volume of the room. Summing these figures, we get 13.2 + 2.64 = 15.84 cubic meters. m.

The required power is calculated based on the volume of the room and heat lossSource foundmaster.ru

It is necessary to take into account the amendment determined by the material used for the construction of the bathhouse.

If it is made of logs, and there is no thermal insulation, then a coefficient of 1.6 is used. When using insulation inside it, you can take 0.6. In the example under consideration, the bathhouse does not have thermal insulation. Therefore, you need to use a coefficient of 1.6. The result will be 15.84 * 1.6 = 25.34 cubic meters. m. Thus, it is enough to purchase a stove that can provide 26 kW.

When purchasing, you need to take into account that usually the minimum and maximum power levels differ by 10 times.

When using, the heating strength can be adjusted according to your taste. The heat level depends on the amount of fuel or electricity supplied. This is convenient if gas or electricity are used; it is enough to set the parameters to the desired value.

Electric sauna stove Source www.kredit-kartu.ru

In wood stoves this can be done in the following ways:

• You can limit the volume of combustion air supplied. This method is convenient to use to regulate the intensity of firewood combustion.
• You can also open the door or window slightly to reduce the degree of heating.

Features of Svarozhich stoves

Let's pay attention to the practical aspects of the products:

1. Ease of transportation and installation of Svarozhich stoves thanks to the prefabricated structure.
2. A special tunnel allows you to heat the stove from the dressing room or steam room.
3. The window for loading stones can be installed both on the left and on the right when installing the heater.
4. The cast iron firebox has a wall thickness of 9 millimeters.
5. The furnace lining is made from several types of materials: natural stone, fireclay brick and polished stainless steel.
6. The heater is made of sheet metal 4 millimeters thick or stainless steel 3 millimeters thick. Innovative production technologies make it possible to perform complex bends of such material without welding seams. The laser cutting complex guarantees tightness and high quality of connections.
7. The container for stones in Svarozhich stoves is located under a cast-iron firebox, which maintains the temperature for a long time. The filament material is placed on the upper platform of the furnace.

All stoves offered are equipped with a remote firebox, so they can be installed in adjacent rooms. Firewood up to 40 centimeters long is loaded into the combustion chamber. The weight of the stove without raw materials for fuel, stones and lining is 270 kilograms. In view of this, its installation requires the construction of a separate foundation.

Svarozhich Lux stoves are equipped with a wide door, which maintains the temperature after the end of the fire, but slows down the heating of the steam room.

Production

Casting of cast iron parts for Svarozhich furnaces is carried out at a large enterprise in the Republic of Belarus, equipped with modern German equipment. In foundry production, only gray cast iron of the SCh15-25 grade is used. The multi-stage quality control system implemented at the plant ensures careful selection and testing of materials. Before being sent to the consumer, the products undergo quality inspection.

The lining of the Svarozhich bathhouse stoves is made from natural materials - coils, soapstone quartzite, soapstone magnesite, soapstone chlorite and serpentinite - on special stone-cutting machines according to the manufacturer’s own patent. Extraction of stone for cladding is carried out in quarries in Karelia and the Urals. The high heat capacity of the structures is achieved due to a coating thickness of 40-50 millimeters.

Representatives of the company assist clients in choosing a stove for the Svarozhich bathhouse in accordance with the parameters of the room. The list of services includes the design and installation of a safe and reliable chimney, installation of thermal protective and finishing materials in a steam room.

Since the start of its activities, it has sold over 4 thousand stoves and 2.5 thousand chimney sets.