How to heat water in a pool at the dacha: 10 working methods

Boiler

This heating method is long, expensive, dangerous and is not suitable if the volume of water is large. Another disadvantage is the risk of spoiling the PVC if the structure is framed or inflatable. However, this method is often found among the advice of summer residents. Be sure to follow safety precautions while working.

• The boiler must be turned off when you place it in the container.
• Check the heating level only when you remove the plug from the socket.
• The boiler should not touch the walls. Especially if they are plastic. To do this, you can build a float from foam plastic, make a hole in it and insert a heating element so that the handle and wire are outside.

You can make several of these floats to make the process go faster. If the container is deep, you need to periodically stir the water so that the bottom layer also warms up.

Manual solar installation

You can heat the water in a swimming pool at your dacha using a regular garden hose. One end of it is connected to a filled reservoir, and the other to a filter pump. Then the hose is rolled up like a snake and placed in a lighted place. The water that gets into it becomes warmer and moves back. The disadvantage of this method is obvious - you need a hot, sunny day for everything to work. Watch a video with a similar water heater made of PVC pipe.

Boiling water outside the pool

It can be heated in large pots and buckets on the stove or fire, and then mixed with cold. The downside is that the method is labor intensive and is only suitable for small volumes. You can also pre-install a barrel on the site in which the water will be heated.

Water pipes

You need to attach a long hose to the hot tap. A costly method if you use it constantly. Plus, filling a large container can take a long time.

Solid fuel heater

You can quickly heat the water in a swimming pool at your dacha using firewood, peat, coal, and dry garbage. You will need a metal barrel, a powerful pump and a coil made of hollow pipe with long ends.

• A coil must be placed inside the tank. You can use a bent steel pipe or an old radiator (not cast iron).
• Attach metal pipe sections on both sides of the coil that extend beyond the tank.
• Place hoses on the pipes. On the one hand, cold water will be supplied through them using a pump, and on the other hand, already heated water will come out.

First turn on the circulation pump. When water enters the coil, light a fire under the tank or in it, depending on the shape of the boiler.

Solid fuel heaters are more economical and practical than the devices listed above. They will heat both small and large tanks even in cloudy weather. Suitable for stationary and inflatable structures. The disadvantages of this method are that constant monitoring of the firewood is required and it is impossible to adjust the temperature. You don’t have to make such a device yourself - a boiler with a heater can be found on sale. The video shows an example of a homemade barrel.

Let's start with the most common heating devices.

• Baths, saunas, swimming pools

  How to make a swimming pool at your dacha: 3 types of structures and methods of installing them

Electric heaters

Electric heaters are either flow-through or storage. The first ones are used most often, since they are small and easily heat small fonts. Tubular heating elements are installed inside the plastic structure. Cold water passes along them, warms up and is sent back.

The power of the devices is from 3.5 to 18 kW. For a small, inflatable tank, the smallest power is enough. True, a low-power device has a peculiarity - it is desirable that the incoming temperature be +18°. Pros: fast heating. Cons: high energy consumption, will not heat large volumes (from 35m³).

Instagram @basstorg

Heat exchangers

The equipment operates from the heating system of the house and is a container with a coil inside. Boiling water from the heating system circulates in the coil. From the outside it is washed by cold water, which gradually warms up and flows back. The first time you connect it, it will heat up for about a day. The device then simply maintains the result.

Cons: long heating time during the first start-up, requires a disinfection system for uninterrupted operation.

Heat pumps

How to heat up an inflatable pool at your dacha quickly? For large framed and stationary hot tubs, heat pumps can be installed. They take heat from air, water or soil. They consume 1-1.25 kW and are connected to any electrical network. The equipment has one drawback - its high price. Sometimes the installation is complex, but simple models can also be found on sale.

Instagram @shieldcovers_com

Solar collectors

These are devices of different shapes and sizes. Most often, rectangular panels are installed on sites. The second parameter is also very important when choosing a system. To heat a large volume and storage, you will need an impressive one. The work process is as follows. The pump pumps water into the solar system. After heating, it goes back into the tank.

The cost of equipment depends on its size and the presence of additional functions: touch sensors, temperature controller. The panel should be mounted in a well-lit place. Pros: Heating occurs quite quickly. The downside is low efficiency in cloudy weather.

Wood burning stove

In this chapter we will tell you how to heat the water in the pool using a regular wood stove. Of course, it will not be enough for a large volume of water, but for a summer bath or a small pond where children can splash and adults can relax after work, it will do just fine. The most pleasant thing is that assembling such a heater will not be difficult, and the money spent on heating is minimal.

The principle of operation of the unit is as follows: inside the firebox there is a metal coil, when a fire is lit in the firebox, water is pumped into the coil using a pump, passes through it, is heated by the hot metal and comes out on the other side, where through another pump it enters the pool.

The most important thing in this matter is to be able to calculate the speed of water flow so that it does not boil in the coil, but only heats up to the desired temperature. To do this, you need to choose pumps with high power - a standard pump or a circular pump will do.

To increase the efficiency of the system, it is recommended to install a chimney. The image below shows another variation of a wood heater.

You can make a fire simply in a coil. You can take this unit with you on hikes so that you always have hot water at hand. To drain water, you can take heat-resistant hoses or a piece of metal-plastic heating pipe.

Electric heaters

Electric pool heaters are ordinary water heating elements with high-power thermostats. They are of the accumulative type - this is when water is pumped into a tank of a sufficiently large volume, where heating elements are installed, and from there it is removed, but at a much higher temperature.

Instantaneous electric pool water heater

Electric pool heaters are also of the flow-through type. It is built into the pool water treatment system after the filter. Purified water is supplied to it, and then, after heating, it enters the pool through nozzles.

Electric pool heaters can operate on a 220 V or 380 V network. This largely depends on the power. It is calculated as follows: for outdoor pools, 0.5-1 kW is taken per cubic meter, for indoor pools - 0.3-0.5 kW.

Since the volumes of water are large, heating costs are also more than significant. You need to heat tons of water, which requires high power and, accordingly, high energy costs. Plus, not every site has the opportunity to additionally turn on 3-18 kW of electrical equipment. And this is in addition to everything that works in the house, as well as the equipment that is necessary to maintain the pool, although it (not counting the electric water heater) “draws” a little.

Methods of heating water

The choice of one or another method of heating a pool depends on the volume of the bowl, on the location of the pool on the ground (indoor or outdoor), in what latitude it is located (whether there is enough sunlight or not). And the most important indicator is that the cost of heating such a pool is minimal. After all, to heat the water in the pool, it will take not only a lot of time, but also the release of thermal energy. Moreover, heating a pool depends on its purpose, so the temperature should be different. In sports - from 24 to 28 degrees. In the wellness room from 26-29 degrees. In a paddling pool for up to seven years, the temperature should be 30-32 degrees. In the children's pool over 7 years old - 29-30 degrees. In the hot tub and spa, the temperature ranges from 35-39 degrees. There are several types of pool water heaters:

• Flow-through;
• Using a heat exchanger;
• Solar collector.

Let's look at each type separately.

Alternative

For small inflatable pools, you can offer several alternative options for heating water, which will not be so financially expensive. These include:

• Homemade solar system. Roll up a garden hose, one end of which is connected to a water tank, and the other to a pump with a filter. Place the rubber snake in the sun and the water that gets into it heats up.
• Boil water separately. Heat water in large pots, then add it to the pool, mixing it with cold water.
• Local water supply. Connect a long hose to the hot tap. Just filling the tank takes a lot of time.
• Another simple option is to stretch black film over the top.

How to heat a lot of water for a swimming pool

In practice, heating water in a pool is carried out using different methods:

1. Using the flow method. To heat a large amount of water, it is circulated through a heating device. The liquid is taken from the bottom of the pool, filtered and passed through a heater. Warm water under pressure is injected down the pool from the opposite side of the inlet.
2. Using indirect heating. In this case, the water is heated by the warm walls and floor of the pool. This is how heating of stationary year-round swimming pools is organized.

In various cases, electricity, solar energy, combustion of gas, oil products and wood-burning stoves help to heat a pool.

Let's get started

We will use a 200-liter metal barrel as the body of the wood-burning stove.

Using a grinder or plasma cutter, cut a hole in the bottom of the barrel to pour out the ash. We also cut out all the excess in the upper part.

We make three fastenings for the coil from a metal strip.

We drill holes for the bolts in the fasteners. Well, accordingly, they are attached to the barrel using bolts and nuts.

The coil is made from a copper pipe with a diameter of 15 mm. A total of 75 meters of pipe will be required.

First, we stretch the coil of copper pipe in length, and then we wind it onto a reel (the author made it from scraps of plywood and boards) of a suitable diameter.

We install the coil inside the housing and fix it with fasteners.

At the next stage, it is necessary to make a metal frame from the strip, to the top of which a circle of sheet metal is welded.

A metal grate is welded to the bottom of the metal frame, on which the firewood will lie.

We insert the metal frame inside the body.

Cut a hole in the sheet metal. The cut piece will be used as a hinged lid.

In the lower part of the body we install taps on the copper pipes (ball or valve - this is at your discretion).

Solar systems

To heat the water in the pool, it is not always enough just sunlight falling on the surface. But you can use solar heat from other surfaces. For this purpose, solar systems—collectors and vacuum tubes—have long been used. Tubular heaters are more efficient, but collectors of sufficient area can provide the required temperature. True, large areas are needed, but a lot of water is heated.

Solar pool heating is effective on clear days

For indoor pools, the size of solar collectors should be about 60-70% of the surface of the pool’s water surface, for open pools - 80-100%. Then the water will be warm. But only on a sunny day. This is one of the main disadvantages of solar systems. The second is the considerable cost of the devices. Smaller than heat pumps, but still sufficient, especially considering that larger devices are needed.

But solar collectors are not difficult to make with your own hands: the materials are available, the technology is simple, there are plenty of examples. One of them is presented in the video. But the area will be too small for this pool. In order for the heating to be significant, several of these are needed. Anyone can make such a water heater with their own hands. With no exceptions.

There is an inexpensive surface solar heater for the pool "Intex". This is a two-layer black PVC film, welded in such a way that a labyrinth for water is formed in it. This mat, which floats on the surface of the pool, is supplied with water by a pump. Walking through the labyrinth, it heats up due to the fact that the black surface absorbs heat well. It comes out already having a much higher temperature. For greater efficiency, water is taken from the bottom of the pool, where the water is colder.

Floating rubber solar collector. Very inexpensive option

This water heater can be used in swimming pools that are located in open, sunny areas. Suitable for pools with a volume of no more than 30 m3; it can increase the temperature by 3-5° depending on the weather.

Technical characteristics of water heaters

When choosing a boiler for certain conditions, you should carefully consider its following parameters.

Boiler power

This is one of the main indicators when choosing a water heater, on which the water heating time and the duration of its operation depend.

Moreover, under equal conditions, gas appliances are almost twice as productive as electric water heaters. For example, a gas boiler with a power of about 3 kW heats a liquid with a volume of 150 liters to a temperature of about 50 degrees in approximately 4 hours.

Inner surface of the boiler

Depending on what material the inner surface of the water heater is coated with, the service life of the device changes. There are three types: stainless steel, titanium and glass fiber.

• Stainless steel or titanium coating is the most preferable option. The service life of such a device will be from 7 to 10 years. These coatings perfectly withstand temperature fluctuations and are resistant to various impurities.
• The next coating is glass porcelain. It is quite easily exposed to elevated temperatures and impurities in water. Boilers with this coating are cheaper and have a service life of about 5 years.

Boiler volume

Water heaters are produced in various volumes for various needs, from 10 to 100 liters. Small volumes are used for washing dishes, while large ones are used for baths and showers. Do not forget that the larger the capacity of the water heater, the longer the water will heat up.

Boiler safety and reliability

When choosing a boiler, pay attention to the maximum water heating value. It is better to choose the option from 60 to 65 degrees

It will also be better if the design includes a thermostat and a temperature sensor.

How to keep warm

We've talked a lot about how to heat a pool, but heating the water is not enough - you need to be able to keep it warm for as long as possible. This will allow you to turn on the heaters less often and, accordingly, spend less money on their operation. The best option for saving water heat is to install an indoor pool. The canopy does not have to be massive and stationary; there are sliding or folding structures.

As an alternative, you can cover the pool with a special blanket. There are floating films on sale that prevent heat from quickly leaving the water. In the evening they cover the surface and remove in the morning. Such protection helps not only to maintain a comfortable temperature, but also to keep the water clean, preventing leaves, dust, debris and insects from getting into it.

If you are going to choose an awning for a pool that needs to be thrown over the structure, keep in mind that it is not very convenient to use. Even if you have a small pool with a width of 2.5-3 m, it will not be easy to pull up an awning alone.

The cheapest and most effective way to keep warm is to make a blanket from black garden film, which is needed to create hula hoop heaters.

The best way to heat your pool is up to you. When choosing a heater, consider not only the cost of consumables for its manufacture, but also how much money and effort will be spent on operating and maintaining the structure in the future.

Material of manufacture

Copper. Due to its ductility, copper is most optimal for the manufacture of a heat exchanger. A copper tube is easy to bend and give any shape. It has a high thermal conductivity coefficient - more than 380. But copper is also not a heat-resistant material and is expensive. Stainless steel. Also quite flexible and responsive material. Although it has a lower thermal conductivity coefficient. But it is resistant to temperature changes. You can weld any configuration from it

IMPORTANT: Galvanized steel cannot be used; when heated, it releases toxic zinc compounds into the air. Metal-plastic. Easily available practical material

Easily found, but it has a low thermal conductivity! Almost two orders of magnitude lower than that of copper. But this material is durable and resistant to temperature changes.

Heating by heat pump

Heat pump connection system

Operating principle:

• heat source - industrial, domestic wastewater, thermal springs or flue gases;
• the liquid circulates through a pipeline laid underground;
• then it enters the heat exchanger, where heat is transferred to the refrigerant and it boils;
• Next comes the formation of masses of steam, which are transferred to the compressor and compressed to 25 atmospheres;
• Having passed around the circle, the water returns to the bowl.

Positive aspects of technology:

• high power;
• free energy sources;
• saving money during operation;
• fast heating.

The only negative is the high price of the equipment.

Heat pump system for water heating

Heat pumps take heat from external heat sources, convert it and transfer it to the heated environment. To increase the temperature of the water in the pool, air-to-water devices are often used. In this case, energy is taken from the air and transferred to water.

Externally, the device resembles an air conditioner. Most of these devices are so automated that once you connect it, set the mode and desired temperatures, you don’t touch it again. Control is possible from a remote control or a panel on the case.

The heat pump looks like the outdoor unit of an air conditioner

Like most automated and technologically complex devices, heat pumps cost a lot. About 130-180 thousand rubles.

Instructions for use of the device

Installation and connection:

1. The heater is installed at a distance of several meters from the pool.
2. The hoses are attached to the ends of the coil, in the pump and the openings of the pool. If there are no holes in the pool, the ends of the hoses are thrown into the water over the side.

How to heat water:

1. Before using the boiler, you must make sure that there are no flammable materials or liquids nearby, and also remove dry grass within a radius of 1 m.
2. Fuel is placed in the boiler firebox and ignited. If the heater consists of a coil without a housing, the fire is lit inside the coil.
3. The fire is maintained until the water reaches the desired temperature.

The fuel is ignited with the pumps turned on. If one of the pumps fails, the fire must be carefully extinguished.

Methods for heating pool water

There is a great variety of modern equipment for heating water, but from the wide range of all devices, five main types can be distinguished, which are more popular today. Among them:

• Solar heaters or collectors.
• Heat pumps.
• Electric heaters.
• Fuel heaters.
• Heat exchangers.

This method is ideal for those who live in an area where the sun shines most of the time. The device will allow you to quickly heat any volume of water by increasing or decreasing the number of special modules that receive solar energy.

Solar heater is a safe and economical option for heating pool water

The presented system has a number of features:

• The solar heater is an environmentally friendly product;
• no additional temperature sensors are required for operation;
• Self-installation of the device will ensure a minimum of financial costs.

Gas heater

As mentioned above, connecting directly to the boiler is fraught with expensive repairs. For this case, special heat exchangers have been developed. They are a small flask that is connected to the heating system through a manifold. Hot water circulates through a snake. Thanks to the pump, which is installed near the pool, the liquid from it is supplied to this sleeve, where the exchange takes place.

Heat exchanger

The article can be used as a practical guide for assembling a specific heater or as a hint for your own developments. We are confident that you will be able to assemble a productive unit.

Models and prices

There are many models of inflatable pools with water heating function on sale. They are produced by almost all manufacturers, since the demand for luxury products is noticeably higher than for ordinary bowls.

With heating device

Heated inflatable pools are equipped with heating devices built into the circulation system. As a rule, they are placed after filters and circulation pumps to avoid losses of thermal energy during the passage of equipment elements.

There are relatively small and larger inflatable heated bowls. The operating principle of the heaters is no different, the only difference is in the power and cost of the models.

Small

Among the small inflatable heated pools, the following models can be distinguished:

Summer Escapes P21-0515

Children's pool, equipped with:

• chlorine generator,
• heater,
• cartridge filter and water pump.

The bowl is round in shape, with a diameter of 152 cm. Depth - 38 cm, which is optimal for bathing children under 7 years old. Cost - 8400 rub.

Bestway Fast Set Pools

The bowl is round in shape, with a diameter of 2.44 m and a depth of 0.66 m. The delivery set includes a filter pump and a repair kit; the heater must be purchased separately. The price of the pool is 4200 rubles.

Intex Soft Side 58431

A round bowl with two inflatable rings at the top and bottom of the sides. Diameter 1.88 m depth 0.46 m. ​​Complete with:

• filtration system with water pump,
• heater,
• stairs and awning.

The price of the set is 1500 rubles.

Large

Large bowls are designed for simultaneous bathing of several people. The volume of water in them is much larger than that of small inflatable pools, so the use of heating systems becomes a necessity. Without them, using the pool will become almost impossible. Popular models:

Intex Easy Set 28176/54920

A round bowl with a diameter of 4.59 m and a depth of 1.22 m. It holds 20 m3 of water, which requires the mandatory use of a heating system.

It is included in the package, along with:

• circulation system,
• filter,
• tent,
• ladder and mat.

Price - 26 thousand rubles.

Bestway Fast Set 57212 / 57291

The diameter of the round bowl is 5.49 m. Depth is 122 m. It is equipped with a full set of equipment, accessories and protective elements (awning, bedding). Price - 48,000 rubles.

Jilong GIANT

The rectangular bowl measures 305 cm long and 183 cm wide. The depth of the pool is 50 cm, which is suitable for a family holiday with children.

It is equipped with all necessary systems (filtration, heating, cleaning) and accessories (awning, mesh, backing). The price of the bowl is 2200 rubles.

With hydromassage

This category of inflatable pools consists of the most expensive models, equipped with:

• bubble massage systems,
• controls,
• devices for programming and servicing the complex.

Such pools are intended only for water procedures and hydromassage. They cannot be used as ordinary inflatable bowls, since the specific design requires compliance with certain operating rules.

The most popular models of inflatable pools with heating and hydromassage:

Intex PureSpa Bubble Therapy 28404

The bowl has a diameter of 145 cm (outer diameter - 196 cm) and a depth of 71 cm. Water is heated at a rate of 1.5-2.5° per hour, maximum 40°.

It is equipped with a PureSpa system consisting of 120 nozzles for supplying warm air bubbles. The price of the pool is 60.5 thousand rubles.

Bestway Lay-Z-SPA Miami AirJet 54123

Round bowl with an outer diameter of 180 cm. Internal (working) diameter - 132 cm. Bowl depth - 66 cm. Equipped with 81 nozzles for bubble hydromassage.

Electronic control with a remote unit allows you to adjust the intensity of the massage, water temperature and other operating parameters. Price - 44,000 rubles.

Bestway Hawaii Airjet

This is a square model, which is rare. Dimensions - 1.8x1.8 m, depth - 71 cm. Equipped with a full set of circulation equipment, a soft inflatable bottom, and accessories. The price of the pool is 51,000 rubles.

Foundation for the building

Before building a stove, you need to lay the foundation for the future structure. The work is carried out in stages:

• First you need to dig a pit. Depth 45-50 cm.
• Sand is poured onto the bottom and compacted thoroughly. The layer thickness is 8-10 cm. A layer of crushed stone is placed on top.
• Next, you should install the reinforcing grid and fill it with cement mortar. The mixture contains crushed stone, sand and cement in a ratio of 1:2:1. The pit is filled to one third.
• Then the second layer is poured. The solution is represented by sand and cement (3:1). It should be filled in such a way that 5 cm remains to the top of the pit. A second mesh with a cell size of 7x8 cm is also placed here.
• Pour the last third layer of cement mortar and level it with the rule. The structure is covered with a polyethylene film.

The concrete will cure within 30 days. To make it stronger, experts recommend moistening it every day. At the end, the foundation is lined with strips of roofing felt.

Inexpensive options

In addition to the above options for heating pool water, there are methods that do not require large investments. To do this, you can use household appliances or improvised materials.

Boiler (or kettle)

Water for a small inflatable pool at the dacha can be easily heated with household boilers with a power of 1 to 2 kW. The main advantage of such a heater is, of course, accessibility. But this is a very dangerous option, although summer residents use it quite often. While the boiler is operating, it is dangerous not only to immerse yourself in water, but even to touch it with your hand. You can get an electric shock with disastrous consequences. The heating element should not touch the walls of the pool bowl, especially if the pool is inflatable or framed from plastic.

"Snail"

When watering the beds, you may notice that the water coming from a long hose is noticeably warmer than the water coming to the site - it has time to heat up. This principle is used in “snail” water heaters. At its core, a “snail” is a mini-solar collector that you can make yourself. Water from the pool is supplied to the circuit by an electric pump, heated and returned to the bowl. Among the advantages are the ability to make it yourself and the inexpensive price of components. Disadvantage: Dependence on sunlight.

Thermal blanket

Heating water in a swimming pool at a dacha can be done without spending any energy resources on it. To do this, you should use a thermal blanket, either factory-made or made independently from bubble film. Operating efficiency is achieved by quickly heating the water and maintaining its temperature at night.

The water warms up faster due to the fact that the matte surface of the cover absorbs more solar energy, heating up, transferring it to the liquid in the pool bowl. Due to the fact that only the upper layers in contact with the blanket are heated, it is necessary to install a circulation pump to mix the water.

Wood heaters

At home, you can use a wood-burning water heater to heat water in a swimming pool. Not only firewood, but also peat or coal are suitable as fuel. The structure of a wood-burning heater is similar to both an ordinary potbelly stove and a heat exchanger. To assemble such a miracle structure, you need to perform the following steps:

1. Take a 200 liter barrel or weld a container from sheet steel. It is also possible to make such a stove from brick.
2. Make a vent, chimney and grate inside the container.
3. It is better to use a steel heating radiator as a heat exchanger.
4. The radiator inside the furnace is fixed so that there is some space from the grate to the heat exchanger. This platform is needed to add fuel to the furnace.
5. Metal pipes extending outside the furnace are connected to the radiator outlets. Next to the pool there are plastic pipes.
6. The inlet pipe of the heat exchanger is connected through a pipe system to the outlet of the pump.
7. The intake pipe coming from the suction pipe is laid along the bottom of the font. A filter is placed on the end of the intake pipe.
8. From the battery outlet, the pipe is simply pulled in a straight line to the pool and lowered into the water.

This wood burning stove for heating pool water works very simply. The first step is to turn on the circulation pump. When the liquid from the font makes one circle around the system, a fire is lit in the oven. In a normal situation, 10 cubic meters of water warms up to 27°C per day.

Building a boiler with your own hands

When working with metal, it is important to follow simple safety rules.

Project selection

For a home craftsman, a real challenge will be to independently manufacture a “Buleryan” type heater, but with patience and metal welding skills, this task is doable.

To create a device for heating water, you will need a square profile pipe with a wall thickness of 4 mm. During work, a welding machine, grinder, clamps and other metalworking equipment are used.

In addition to the square pipe, you will need several sheets of iron for the second chamber and doors, a valve, a pipe for the expansion tank, plumbing threads for the outlet and input of coolant.

The procedure for welding a hot water stove using wood

First of all, the collectors are welded: lower and upper. The lower one has the shape of a “box”, the entire structure will stand on it, the upper one is of any shape and serves as an expansion tank.

The heat exchanger consists of L-shaped square or round pipes bent in the form of a clamp. Their bottom is connected to the manifold, the top to the expansion tank. The gaps between the pipes are welded tightly with sheet metal.

A secondary combustion chamber is installed at 2-3 heights of the resulting tunnel. Hot gases rise along the hot shelf. It is better to make it from metal 5-7 mm thick; air ducts are connected to the beginning of the shelf.

A grate is installed at the bottom of the firebox.

The ends of the tunnel are welded, a chimney is mounted on the back wall, and doors and an ash pan are hung on the front side.

It is convenient to make the ash pan in the form of a removable scoop: this makes it easier to clean the stove.

The legs are welded, handles and wheels are attached - the stove can be transported like a wheelbarrow.

The stove is ready, now you can connect the chimney, fill the system with water and do a test run.

What it is?

An inflatable jacuzzi is practically no different in appearance from a regular garden pool. But from a functionality point of view, there are significant differences. Such products, as a rule, have: water heating, air massage, hydromassage and much more.

All inflatable hot tubs are equipped with automatic filtration and cleaning functions. This greatly simplifies the process of cleaning and changing water. Thanks to the two-layer material, maximum strength of the product is ensured.

The inner layer of the inflatable Jacuzzi is made of composite fibers, and the outer layer is made of a laminated PVC base. Even if several adults lean on the walls at once when swimming, the product will not deform and will cope with the load perfectly.

Common models of inflatable hydromassage pools are designed for four adults. Their standard height varies between 1.6 - 1.9 meters, with a volume of 1500 cubic meters.

Inflatable Jacuzzi pools are not designed for swimming but for relaxation and comfortable recreation in the fresh air.

Budget

The budget category of devices includes:

• boilers;
• snails;
• bedspreads;
• firewood.

Boilers

A boiler can easily heat water in a small children's pool. However, when using this method, you must follow safety rules: do not touch the water while the boiler is operating and do not lean it against the walls of the pool. As an example, to obtain the required temperature, you can simply add a little hot water.

Snails

A homemade solar battery is called a snail. Such devices are often sold in markets at a fairly reasonable price. The snail can cope with heating quite well, but only in sunny weather.

Photos of our contractors' pools:

• 4 months ago

  #swimming pool#swimming poolin the house#swimming pool#swimming pools#swimming pool at the dacha#swimming pool for children#swimming pool at home#swimming poolmoscow#construction#construction#pump#tilesforpool#swimming pools#counterflow#frame pools#heated pool#pool construction

• 4 months ago

  #swimming pool#swimming poolin the house#swimming pool#swimming pools#swimming pool at the dacha#swimming pool for children#swimming pool at home#swimming poolmoscow#construction#construction#pump#tilesforpool#swimming pools#counterflow#frame pools#heated pool#pool construction

• 4 months ago

  #swimming pool#swimming poolin the house#swimming pool#swimming pools#swimming pool at the dacha#swimming pool for children#swimming pool at home#swimming poolmoscow#construction#construction#pump#tilesforpool#swimming pools#counterflow#frame pools#heated pool#pool construction

• 4 months ago

  #swimming pool#swimming poolin the house#swimming pool#swimming pools#swimming pool at the dacha#swimming pool for children#swimming pool at home#swimming poolmoscow#construction#construction#pump#tilesforpool#swimming pools#counterflow#frame pools#heated pool#pool construction

• 4 months ago

  #swimming pool#swimming poolin the house#swimming pool#swimming pools#swimming pool at the dacha#swimming pool for children#swimming pool at home#swimming poolmoscow#construction#construction#pump#tilesforpool#swimming pools#counterflow#frame pools#heated pool#pool construction

Bedspreads

A blanket is considered probably the most economical method of heating. This simple device provides a temperature increase of 3-4 degrees within a few hours.

Firewood

Another budget option for heating small pools is heating with wood. To do this, you will need a special oven, which is not difficult to find on sale. And the process itself is very simple! A circular pump is installed in the pipeline, and firewood is placed in the stove. While the pump is turned on, the circulation of water under the stove coil ignites a fire. In this way, you can provide constant heat of 27 degrees in a ten-cube pool for 24 hours.

There are many ways to make a pond warm. And depending on preferences and financial capabilities, everyone can choose the best option for themselves.

1. Enter the parameters of your pool or simply leave a request
2. We will receive an estimate for your project from each of our contractors
3. We will choose the best offer and contact you
4. You will get a pool at the best price

Your promo code: “Pool for you”! Tell it to our employee and the surveyor’s visit will be free for you.

Electrical

They are the most common. Small in size, nice in design, they look amazing next to the pool. Each of them has a pump with a filter. In this way, the water in the pool is not only heated, but also purified at the same time.

Intex water heaters are very popular. One of the popular models is Electric Pool Heater Intex 28684/56684. This is a low-power heater designed for heating water in small-volume pools (up to 17 m³).

It is convenient to use in dachas where inflatable pools for children are installed. Absolutely safe to use. Easy to install. Water heating is controlled by a thermostat, which is very convenient. But manual control brings some inconvenience. Supply voltage 220 V, power 3 kW. Water heaters of the Bestway 58259 brand are no less in demand. The same applies to low-power water heaters. Operates from a 220 V network. Increases the water temperature in the pool from 0.5 to 1.5ᵒ C/hour. Heating of water can be accelerated if a special covering awning is used for this. The heater operating mode is within 16-35ᵒ C. Just like the Electric Pool Heater, it is convenient for heating small volumes (up to 17,000 l). In this case, the diameter of the pool should not exceed 4.5 meters.

The Bestway water heater does not have a thermostat, so the temperature of the water in the pool must be checked by touch or with a thermometer. But some models are equipped with a thermostat. This question must be clarified with the seller when purchasing a water heater. When selling, the Bestway 58259 water heater is equipped with hoses and a hanging awning

You need to pay special attention to this, because sometimes unscrupulous sellers sell these accessories separately

Flow-through electric heaters from the Swedish company PAHLEN are very popular. The power of these heaters varies from 3 to 18 kW. Accordingly, the voltage in the 220 V network will power only low-power 3 kW devices. For others, the network voltage should be 380 V.

PAHLEN electric heaters are equipped with thermostats and relays that protect the water from overheating. In addition, they have a number of other security elements. Powerful heating elements (heating elements) are installed inside the metal body, which heat the water. Low-power heaters are made of heat-resistant plastic housings.

The heaters of this line have small-sized bodies, but at the same time they pass through a fairly large amount of water, which is heated, if necessary, to 40ᵒ C.

Manufacturers

Despite the wide range of inflatable Jacuzzis on the market, the most popular and popular companies are:

Intex

As a rule, Intex brand pools are round in shape. Their body color is usually beige, white or blue. The features of this manufacturer include the simplicity of the designs. Therefore, their installation and dismantling is easy and quick. The use of special material guarantees the strength and resistance of the product to deformation. The presence of a powerful heater allows you to bring water to a high temperature in just 20-30 minutes.

The products are equipped with nozzles (from 100 to 160 pieces), which allow you to perform hydromassage in more than 15 modes. The products are supplied with assembly instructions, a pump and a disk that describes in detail the rules of operation and installation. Jacuzzis are also sold with storage cases and water quality testing strips.

Bestway

The manufacturer produces inflatable Jacuzzis in white, brown, and beige colors. Almost all models have a terylene surface with polyethylene thread and lucicone in their composition. The presence of a control panel allows you to select modes of varying degrees of intensity.

All models differ in the number of nozzles (from 80 to 160 pieces). Together with them, the kit includes a thermally insulating cover, a replaceable cartridge and a case for off-season storage and transfer.