Cast iron sauna stoves Magnum official

Magnum LLC specializes in the sale of stoves for baths and cottages. In our online store you will always find what you need. Experienced specialists will help you choose the most suitable stove for your bath, based on your wishes. We always have a wide selection of additional equipment and accessories for installing the heating system of your home or sauna. At your request, our specialists will make a competent calculation of chimneys and components, as well as carry out professional installation of any purchased equipment on a turnkey basis.

Catalog

Magnum LLC supplies wood-burning and electric stoves for baths, saunas, as well as heating stoves and fireplace stoves. We sell chimneys, as well as additional equipment for stoves: tanks, control panels, stones, and more.

Magnum LLC is a manufacturer of cast iron firebox ChT-1 and premium-class sauna stoves Russian Steam, President, Magnum, Yeger, Taiga. We do not assemble furnaces, as all our competitors do; we have our own foundry and stone processing shop. This is why prices for Magnum stoves are on average 20% cheaper than their analogues.

produces cast iron sauna stoves lined with natural stone, unique in its kind. All Magnum sauna stoves are cast from high-quality cast iron and trimmed with natural soapstone and coil stone.

From us you can also buy sauna stoves, fireplace stoves, fireplaces, and cookers from all Russian manufacturers, as well as leading foreign companies.

For wholesale buyers there is a flexible system of discounts (up to 20%). You can agree to receive a discount by calling our office.

We always have a large number of ready-made sauna stoves in our warehouse, call and we will select the stove you are interested in.

Check to see if the oven is in stock!

Facing "Russian Steam"

All stages of production, from cutting stone into slabs to assembly and polishing, are carried out in one production facility under strict control. Why did the consumer benefit?

Soapstone is used to make the cladding. Its hardness varies - the lower it is, the greater the heat capacity. The cladding is made of medium-density stone, which achieves a balance between heat capacity and strength.

The thickness of the stone used for installation of the cladding is 50 millimeters, while the average thickness of the stone in such structures from other manufacturers is 40 millimeters. This seemingly insignificant detail increases the weight of the cladding by 60 kilograms. The more massive the lining, the greater its heat capacity. That is, the oven runs longer due to inertia.

You can steam with such a stove for much longer without firewood.

Furnaces for summer cottages

Everyone knows that a cozy country house, first of all, should be warm. Today there are many options for heating a summer house or country house. Heating boilers, fireplaces, electric and gas convectors will easily fill your home with warmth. But nothing can replace such a simple and convenient thing as a stove; in its modern design it is quite capable of competing with boilers and fireplaces.

Advantages:

Unlike sauna stoves, you do not need to decide in advance on the type of steam. For high-quality heating of a country house, compliance with completely different requirements and parameters is required. Modern stoves for heating dachas do not at all resemble traditional massive and large-sized structures.

Differences:

Contacts

Magnum LLC

We specialize in the sale of stoves and stove equipment, and also provide high-quality installation of stoves, fireplaces, chimneys with technical support at every stage.

Moscow, Varshavskoe highway, 48

There is no exhibition hall in Varshavka!

Email: This email address is being protected from spambots. You must have JavaScript enabled to view it.

Chekhov, Gagarina, 104

Working hours: Monday - Saturday, from 10.00 to 18.00

Serpukhov, Proletarsky town, st. Central, 7

Email: This email address is being protected from spambots. You must have JavaScript enabled to view it.

WhatsApp: +7 (925) 119-2472

Working hours: Monday - Friday, from 10.00 to 18.00

Placing an order: You can place an order for a stove and any components for stoves in any way convenient for you:

Why, when choosing an expensive stove, do they turn to us?

Typically, standard phrases are written in such sections, for example: low prices, highly qualified specialists, quality assurance, selection of equipment, large selection. We have all this, but you will certainly appreciate the following:

A little more detail on each point.

1. Magnum stoves Always available in our warehouses

Any modification, including any President and any Russian steam , is available in the company’s warehouses, we will not take an advance payment from you and will not delay the execution of the order for two weeks, we are ready to deliver the stove within 24 hours to any point in Moscow and the Moscow region .

2. You can buy any stove without leaving your country house

In most organizations, in order to purchase a stove or other equipment, you will be invited to an office or to a retail outlet (possibly on the other side of Moscow), where the components will be counted in your presence. After which (if everything you need is in stock and your car is spacious enough), you can pick up the goods, or, leaving 100% prepayment, wait for packaging and delivery.

In the worst case, if the stove is out of stock and delivery is too expensive, you will have to go to the seller twice: first pay for the purchase, then pick up the goods from the seller’s warehouse yourself. In a modern metropolis, each such trip ultimately takes a whole day.

Do you value your time? We will make sure that instead of pointlessly standing in traffic jams, you do other, more important things.

We save your time!

3. We will only recommend what is good for you

In the modern market, when the buyer does not quite understand what he really needs, sellers often sin by abusing their “expert” opinion, selling not what is best for the buyer, but what is more profitable to sell.

We value our reputation, we will not recommend dubious components and we will not mislead you about the properties of the product.

4. We will always, without any negotiations, exchange or take away unnecessary (excess) equipment and return the money

5. We produce the stoves ourselves, and we ourselves bear the warranty obligations.

We produce some of the best and most expensive sauna stoves, such as Russian Steam and President, ourselves, and we provide a 3-year guarantee on each of the stoves we sell.

We will help you deal with warranty cases of any stoves purchased from us. Call us and we will solve your problem ourselves.

We provide a guarantee for all equipment installation work we perform.

6. You can pick up the ordered stove around the clock

It happens that you need to pick up (bring) the stove late at night or early in the morning. We will easily solve this problem and give you the stove at any time convenient for you.

7. We don’t talk bad about our competitors, we just do our job efficiently

We are increasingly faced with black PR and other cases of unfair competition.

We respect our competitors and strive to be ahead of the competition by improving ourselves rather than throwing mud at our rivals.

We are one of the largest players in the heating equipment market, processing more than 500 orders per month. At the same time, we remember all our clients and try to ensure that everyone remembers us only from the best side.

Wood-burning stove Magnum President ChT-1 in stone

To quickly warm up the steam room, you just need to open the cast-iron door from above. As soon as the temperature has risen to the value you need, you should close the cast-iron door, blocking the hot air flow. The steam room continues to receive soft and comfortable heat emanating from the stove lining. Due to the fact that the natural stone cladding is very massive, the steam room will never overheat. You no longer have to pour cold water on the walls to raise the humidity and lower the temperature. Due to the fact that the stones are in a completely closed heater, the President stove heats the stones to a temperature of over 4000C, while the lower part of the stone stack warms up by more than 5000C. When water hits hot stones, it evaporates explosively and turns into finely dispersed superheated steam, which is popularly called “light.” Only “Light Steam” has a beneficial and health-improving effect on the human body! The steam will fall out as condensation, and you will again have a comfortable temperature in the steam room and hot stones in the heater of the President CT-1 stove.

The President ChT-1 model from Magnum is presented in several cladding options using natural stone, such as:

1. Heat-intensive soapstone . This is an environmentally friendly rock with a smooth surface. By releasing accumulated heat evenly and for a long time, soapstone has a beneficial effect on a person’s well-being, increasing immunity, reducing blood pressure, and improving metabolism. Soapstone is the undisputed leader among other materials in terms of thermo-physical properties. One hundred kilograms of soapstone replaces the heat capacity of 500 kilograms of brickwork. In practice, after heating the stove for 4 hours, the stove operates by inertia for 3 hours and remains warm for more than a day. Soapstone takes on special meaning when installed on a sauna stove.

2. Serpentine gem. A stove decorated with this decorative mineral stone looks royally luxurious. When heated, the coil releases ozone and has many healing properties. The coil is soapstone magnesite interspersed with serpentinite. It would be more correct to call it a polished coil. The color of such a stone can vary from gray-green to dark green. The rock is slightly harder than soapstone, polishes better and has White Quartz in its structure, which releases ozone when heated. In terms of heat-accumulating properties, the coil has a slightly less heat capacity than soapstone (about 10-15%), but in return you get the royal appearance of the President ChT-1 sauna stove.

3. We offer President stoves, both made entirely of soapstone or coil, and combined options . In the latter case, the central plates are made of soapstone, which gives off “good” heat, and the coil is used as a finish, giving the stove exclusivity and originality.

For President, Russian Steam, Magnum, Jaeger, Taiga stoves, we strongly recommend installing a German Shidel ceramic chimney. The guaranteed service life of the Shidel chimney is 30 years. The President ChT-1 sauna stove is a powerful combustion unit that can greatly heat up a stainless chimney, and this will lead to unnecessary overheating in the steam room, as well as an increased fire hazard if the assembly and operating conditions are not met. The Shidel chimney does not heat up above 50C on the outer wall, and this is safety for you, your bathhouse and stove. Cladding of surfaces with natural stone: tiles and corners made of soapstone or coil - beautiful and safe finishing of the furnace portal on the combustion side, finishing of adjacent walls to the furnace in the steam room and lining of the Shidel chimney. When facing wooden walls, it is not just finishing with tiles, but installing a profile wall made of fire-resistant materials mineralite and basalt wool. Only after this, specialists lay the tiles on the mineralite sheets using a special heat-resistant adhesive. The combination of these components during installation leads to compliance with fire safety standards and SNIP requirements.

Sauna stove President ChT-1 in stone

Going to the bathhouse for a modern city dweller is no longer a banal hygienic procedure. This is a tradition, a whole ritual that begins with the preparation of the steam room. You need to heat the bathhouse thoroughly, and, of course, the main condition for a real Russian bathhouse is good, finely dispersed steam. The President stove with a cast iron firebox ChT-1 was created especially to obtain ideal bath conditions and first-class steam. The President model is distinguished by ease of installation and classic design. This development of the Magnum company has already proven itself and is a sales leader on the Russian market in the Premium segment, along with such a model as the Russian Par ChT-1.

The ergonomics of the President ChT-1 wood-burning stove are thought out to the smallest detail; the stove will fit perfectly even into a small steam room. Stone cladding looks very expensive thanks to the rounded edges, and in the option of combining two types of natural stone, you are buying a luxury item. The heat-transfer surface of the stove is increased due to the angled upper wall, which is located on the side of the steam room. The bevel also makes it possible to safely give in steam, since the location of the door prevents steam from getting on the person giving it.

All the power of the stove is in cast iron!

The key to reliable operation of the stove lies in a high-quality firebox made of ChT-1 cast iron, when developing it, we took all the best from existing analogues and added options that significantly simplified the use of the stove. President ChT-1 is a model of a wood-burning heater with a remote firebox, which allows you to combine the ideal stove in the steam room and the appearance of a full-fledged fireplace from the side of the rest room. You can enjoy the warmth of the fire and the play of flames thanks to the large, always clean glass. Only our firebox has a “clean glass” system, and you will always be in control of the processes in your oven.

The Magnum company has invested in cast iron production and equips all its furnaces with modern and functional combustion units ChT-1 made of heat-resistant cast iron.

Splash some witchcraft... A beneficial and health-improving Russian bath is unthinkable without hot stones and a ladle of water. Splash some moisture, turn up the heat - you will see how the water evaporates explosively, turning into light steam. It is the stones placed in the sauna stove that allow the steam room to fulfill its intended purpose. When designing the President model, Magnum company specialists significantly improved the box for stones, making it rigid, durable, and able to withstand significant temperature changes. The box perfectly holds 120-180 kg of stones, depending on the model and the nature of the installation.

The President ChT-1 model from Magnum is presented in several cladding options using natural stone, such as:

To make the stove in the recreation room look like a full-fledged fireplace, we recommend a portal made of natural stone.

Combustion unit

Now there is a fairly large supply of stoves on the market similar to the ChT-1 stove. The stove sample can be considered classic and all stoves are similar to each other. How do Magnum stoves differ from their analogues from other manufacturers?

All stoves are approximately the same size, similar in design, with the same thickness of cast iron. All the differences are in the little things.

ChT-1 stoves are made in Russia, they are cast at a plant in the city of Protvino. It should be noted the quality of the stove. The purchased stove does not require “finishing with a file.” It can be collected immediately. Instructions are included with the oven. The oven-constructor is assembled into one whole. Surprisingly enough, usually cast iron structures cause many problems during assembly.

The ChT-1 stove is one of the few on the market made entirely of cast iron. The combustion unit itself, the front part, and the tunnel that connects the combustion unit to the door are made of it. No metal or ferrite parts are used in production. This significantly increases its reliability under operating conditions exposed to high temperatures.

The front part of the oven is painted in a special chamber with heat-resistant paint. The painting is done very well, there are no paint runs or peeling. A characteristic and very important element is the blowing of the door glass. Through the convection channel, air passes from the inside along the glass and blows it. As a result, the glass stays clean longer. You have to wipe it down less often, and you can always see what is happening in the firebox.

The unit door has a reliable locking system. The blower and air duct controls operate without any complaints, which is surprising in itself. Small cast iron parts often cause many problems when interacting. Cast iron is a rather fragile material and often breaks. To avoid this, the ears of the door hinges and the mounting of the combustion tunnel on the ChT-1 stove are made quite massive.

The main advantage of the ChT-1 model over its competitors is the quality of cast iron. In production, heat-resistant alloy cast iron is used, which can withstand heating temperatures of up to 1000 degrees. All manufacturers use SCh-10 cast iron (Grey Cast Iron, 10 – tensile strength) for the manufacture of stoves. Gray cast iron according to GOST is used only for the manufacture of non-critical parts, for example, manhole covers, park benches, sculptures.

For the manufacture of the ChT-1 model, cast iron is alloyed by the addition of graphite, which increases its heat resistance, as well as the addition of nickel and chromium, which increases strength. Good cast iron should contain up to 19 percent nickel and up to 3 percent chromium.

This cast iron can withstand all required loads well. Each cast iron part of the furnace is produced with constant control of quenching and tempering technology. Internal stress in parts of complex shape is relieved. This ensures that the stove will not burst during the first fire.

Magnum stoves for baths: features and models

Currently, there are many ways to heat a dacha, housing outside the city, or a bathhouse. Boilers, fireplaces, electric and gas convectors easily fill a room with heat, but nothing can replace such a simple and convenient thing as a stove. In its modern version, it can compete with boilers and fireplaces.

The Russian Magnum stove quickly found its place and is in good standing with buyers in the huge market for bath products. It has its own distinctive features, including strength and long service life.

Cast iron firebox ChT-1 Magnum

Range of stoves

Reviews from owners of these furnaces indicate the reliability and safety of the structures. Magnum stoves have a stone lining, thanks to which the risk of burns becomes significantly lower. The protective cast iron lining screens hard IR radiation, which, in turn, increases environmental friendliness.

The range of stoves includes models with power characteristics starting from 15 kW. The average dimensions of the items (i.e., height by width) are 825x570 mm, weight 220 kg, efficiency reaches 60%. The stoves heat rooms with a volume of up to 35 m³. The minimum cost of models is 75,000 rubles.

Structurally, the stove under consideration includes a combustion chamber and lining.

Assembling the combustion unit

The combustion unit is assembled quite simply; no special qualifications or tools are required. Having detailed color instructions makes the process even easier. Assembly requires two people.

The base of the unit is installed on a flat surface. Next, the side walls are installed on the base. While one person holds the side walls, the second person places the back wall. The side walls are placed with the protrusions up, the back - with the protrusions down. The side walls are inserted into the corresponding grooves on the back wall. After this, the front wall is installed. The grooves of the front wall are also fixed with the side walls.

A well has formed in the combustion unit, into which a grate needs to be installed. First the frame is placed inside, then the grate itself. Next, a container for stones is installed on the ledges in the walls. The container for stones rests against the front wall. This is important because smoke should flow along the back wall. Now all that remains is to install the upper part of the oven, the lid. The lid secures the entire structure, locking it into a lock.

Next, the tunnel is bolted to the combustion unit. Bolts are supplied complete. A pipe and an ash box are installed. Assembly is complete.